GE Security VR14120 Digital Video Receiver, MM, 1 Fiber

The VR14120 from GE Security is a Digital Video Receiver, MM, 1 Fiber. The video transmitter and video receiver units utilize state-of-the-art 10-bit digital-encoding and decoding for true broadcast-quality video transmission that exceeds the requirements of EIA RS-250C for Short-Haul Video Transmission. These environmentally-hardened units provide transmission of video over one single mode fiber optic cable and are ideal for use in unconditioned road side or out-of-plant installations. As the level of video performance is so high, the VT/VR14100-series is ideally suited to networks employing multiple physical layers where video degradation may be problem, such as FDM or digitally-encoded video multiplexing links, T-1 or fractional T-1 codecs, and SONET or ATM backbones. These units are completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera system. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. LED indicators are provided for rapidly ascertaining equipment operating status, and this equipment is available in either stand-alone or rack-mount configurations.

Features

State-of-the-Art 10-Bit Digitally-Encoded Video Transmission

Exceeds All Requirements for RS-250C Short-Haul Transmission: True Broadcast Video Performance

Exceptionally Low Video Distortion with Zero Performance Variation vs. Optical Path Loss

Directly Compatible with All NTSC, PAL, or SECAM CCTV Camera Systems

LED Status Indicators Provide Rapid Indication of Critical Operating Parameters

Solid-State Current Limiters on All Power Lines Provide Equipment Protection

Wide Optical Dynamic Range: Optical Attenuators are never Required

Robust Design Ensures Extremely High Reliability In Unconditioned Roadside Environments

Ideally Suited to Networks Requiring Multiple Physical Layers Where Video Degradation May Be a Problem

Specs

Manufacturer Utc Fire & Security

Condition New

Model VR14120

Video Input` 1 volt pk-pk (75 ohms)

Bandwidth 5 Hz - 10 MHz

Signal-to-Noise Ratio (SNR) >67 dB @ Max. Optical Loss Budget

Wavelength 1310 nm, Multimode; 1550 nm, Single Mode

Optical Emitter Laser Diode (all models)

Receiver Sensitivity .5 µw (-33 dBm)

Number Of Fibers 1

Optical ST, SC or FC (see ordering information)

Video BNC (Gold Plated Center-Pin)

Operating Temp -40° C to +74° C

Storage Temp -40° C to +85° C

Relative Humidity 0% to 95% (non-condensing)†