Home > Fire > Initiating Device > Initiating Device, P > E Smoke

Honeywell Fire Systems SD355T Addressable Photoelectric & Thermal Detector w/ Base

Honeywell Fire Systems SD355T Addressable Photoelectric & Thermal Detector w/ Base

Item Id: FIL-SD355T

Review this item

Retail Price: $68.25
Your Savings: $9.41
Your Price: $58.84

Quantity

Email a friend

Description

The Fire-Lite SD355T is an addressable photoelectric detector with an included thermal elemennt and the B350LP base.

Features

Two-wire loop connection

Unit uses base for wiring

Addressable by device

Direct Decade entry of address: 01 – 99 with MS-9200 series, and 01 – 159 with MS-9600 series

Unique single-source, dual-chamber design to respond quickly and dependably to a broad range of fires

Sleek, low-profile design

Integral communications and built-in type identification

Built-in tamper-resistant feature

Removable cover and insect-resistant screen for simple field cleaning

Withstands air velocities up to 4,000 feet-per-minute (20 m/ sec.) without triggering a false alarm

Factory preset at 1.5% nominal sensitivity for panel alarm threshold level

Visible LED “blinks” when the unit is addressed (communicating with the fire panel) and latches on in alarm

Sealed against back pressure

Direct surface mounting or electrical box mounting

Mounts to: single-gang box, 3.5" (8.89 cm) or 4.0" (10.16cm) octagonal box, or 4.0" (10.16 cm) square electrical box (using a plaster ring — included)

Fully coated circuit boards and superior RF/transient protection

94-V0 plastic flammability rating

Low standby current

Remote LED output connection (P/N RA100Z)

Specs

Manufacturer Honeywell Fire Systems Us / Fire-Lite

Condition New

Voltage range: 15 – 32 VDC (peak)

Standby current: 300 µ A @ 24 VDC

LED current: 6.5 mA @ 24 VDC (latched “ON”)

Air velocity: 4,000 ft./min. (20 m/sec.) maximum

Diameter: 6.1" (15.5 cm) installed in B350LP base

Height: 2.1" (5.33 cm) installed in B350LP base

Operating temperature range: for SD355(A): 0°C to 49°C (32°F to 120°F); for SD355T(A): 0°C to 38°C (32°F to 100°F). SD355R(A): installed in a DNR(W) -20°C to 70°C (-4°F to 158°F)

Temperature: 0°C – 49°C (32°F – 120°F)

Relative humidity: 10% – 93%, non-condensing