Questions? E-mail Us
1 step Checkout
Seco Larm VG-1C12AQ Passive In-Line Device To Help Eliminate Interference Caused By Ground Loops In Multi Camera CCTV Installations-BNC-To
review 0 Review(s)
Review this item Review this item
Item #: SEL-VG1C12AQ
Retail Price: $35.25
Your Price: $30.48
Your Savings: $4.77
Click below for item description
Item Description
The ENFORCER series video ground loop isolators are passive devices that help to reduce ground loop interference caused by a difference in ground potential typically caused by unbalanced building power loads. Ground loop isolators can be installed in new installations or added to existing installations. Video ground loop isolators should be installed on the camera side of your cable and can be used with standard BNC coax cable or with video baluns over UTP.

  • Built-in Transient Voltage Suppression (TVS)
  • Gold-plated BNC connector improves reliability and product life
  • Passive operation -- No external power required
  • High immunity from interference -- Built-in impedance coupled device and noise filter
  • Helps to reduce RF interference, cross talk, picture tearing, and other picture quality problems
  • BNC and quick connect terminals for easy installation
  • Small size, only 27/ " x 1 " x 1" (73 x 28 x 26 mm)

  • Manufacturer Seco-Larm Usa Inc.
  • Condition New
  • Bandwidth:VideoDCto8MHz
  • Maximum Input:lOVp-p
  • Insertion Loss:0.5dB
  • Frequency Response:0-3dB at 10MHz
  • Isolation Voltage:600VDC (Min}
  • Insulation Resistance:100M Ohm
  • Transient Voltage Suppression:12Vrms
  • Range:984' (300m)
  • Connectors In:BNC Male
  • Connectors Out:BNC Female (VG-1C12AQ)
  • Impedance:75 ohm
  • Dimensions: (78.6 x 294 x24.4 mm)
  • Material:ABS Black
  • Temperature:Operating temp. 32 Degree-131Degree F {0Degree~55DegreeC)
  • Browse Similar Items
    Related Items