Visonic WT-100 12-bit Universal Transmitter
Item #: VIS-WT100
Retail Price: $40.65
Your Price: $35.15
Your Savings: $5.50
Click below for item description
WT-100 is a general-purpose universal transmitter suitable for use with virtually any type of normally open (NO) and normally closed (NC) dry contacts; inertial and other vibration detectors; low-current PIRs, glass-break and other sensors. Incorporating a reed switch for protection of a door or window, the WT-100 transmitter is very easy to install and use.
When triggered, the WT-100 model transmits, for a period of 2-4 seconds, a 12-bit message selected by an internal DIP switch from 256 possible combinations. The message is repeated at one-minute intervals until the input is restored.
The transmitter is powered by a standard 9V alkaline or lithium battery. A special circuit continuously monitors the battery voltage, issuing visual alarms on the unit as well as sound alarms at the target receiver.
WT-100 is available in several optional frequencies in compliance with European, U.S. and other international standards.
Suitable for virtually all types of NO/NC contacts, inertial and other vibration detectors and low-current sensors
Built-in reed switch for door and window applications
Low battery supervision
Transmission cycle: 2 seconds on, 1 minute off, until the input is restored
9 VDC alkaline or lithium battery
Tamper switch protection
Compatible with all Visonic WR-200/WR-300 wireless receivers and 12-bit wireless devices
Browse Similar Items