Alarm Lock PG21MB Metallic Bronze Finish Narrowstile Door Alarm with Rim Cylinder

The PG21 Series includes advanced narrow-stile microprocessor-controlled door alarms for surface mounting on a door or door frame. Typical applications include emergency fire escape doors, nursing home stairwell doors, rear restaurant and theater doors.

Features

Two selectable arming modes:

Always armed mode - when key is turned counter clockwise to the disarm position, the key cannot be removed. To remove key, turn back to arm mode, thus keeping unit armed always

Standard arming mode - when key is inserted turning counter clockwise will disarm and key can be removed.

Turning key clockwise will arm and key can be removed

Continuous power with the addition of an external power supply

Multiple door monitoring permitted with built-in external reed switches

Status Indicator - The LED will indicate RED when armed

Entry Delay Time Options - include 15 seconds, 1 minute 15 seconds & 3 minutes 15 seconds

Sleek model design key-activated door alarm for use on standard size and narrow stile doors

Unauthorized use of door causes alarm to sound and activates LED indicator

Options include continuous alarm, minute shutdown with auto reset and exit/entry delay

Uses standard mortise cylinder

Tamper switch supervised

For exterior key control, optional RIM cylinder may be used

Metallic Bronze finish

CEM Mortise cylinder for interior arming/disarming

CER Rim cylinder for exterior arming/disarming

Specs

Manufacturer Alarm Lock

Condition New

Dimensions: 9" x 2 1/2" x 2 3/8" (22.8cm x 6.3cm x 6.8cm) (LxWxD)

Power Requirements: 9-Volt Alkaline Battery (supplied)

Sound Device: Piezo electronic sounder sweep siren, steady or pulsing, 110dB at 10 feet

Relay Contacts: (Form-C) rated at 24VAC/DC at 1A (noninductive)