Alarm Lock PP100 Battery Eliminator

The PP100 is designed to replace all power normally supplied by the device's internal batteries, thus allowing these internal batteries to be used exclusively for battery backup if AC is lost.

Features

The PP100 conserves the battery which automatically takes over as the power source to sound the alarm in the event of a power failure or intentional cut-off

A built-in circuit breaker with push-button reset eliminates troublesome fuse replacements

Includes a cam lock cylinder and 6’ of armored cable adequate to provide a door loop at the hinged-side of the door

Can be used with all 6V and 9V models

The PP100 can be used with the following Alarm Lock models: 250 Series, 700 Series, 11A Series, PG10 Series, LL-1 Series, PG21 Series, PG30 Series, DL Series of Digital Locks

Specs

Manufacturer Alarm Lock

Condition New

Dimensions (L x W x D) 6" x 4 5/8" x 2 3/4" (15.2cm x 11.7cm x 7cm)

Input Voltage 105-125VAC @ 60Hz

Output Voltage 6-9VDC @ 0-300mA unregulated. 9 volt adapter