Altronix ACM4CBE | Access Power Controller, 4 PTC Class 2 Relay Outputs, FAI, BC100 Enclosure
Altronix ACM4CBE | Access Power Controller, 4 PTC Class 2 Relay Outputs, FAI, BC100 Enclosure

Altronix ACM4CBE | Access Power Controller, 4 PTC Class 2 Relay Outputs, FAI, BC100 Enclosure

Part Number: ALT-ACM4CBE
0 Review(s)
Write a Review
Availability:
$76.86
Retail Price:$81.24
Your Savings:$4.38(5%)
  • Low prices.

    Price match guarantee

  • In-House Experts.

    We know our products

  • Easy Returns.

    Quick & Hassle Free

  • Superior Selection.

    Extensive product catalog

Altronix ACM4CBE converts one (1) 12 to 24 volt AC or DC input into four (4) independently controlled Class 2 rated PTC protected power-limited auto-resettable outputs rated at 2A each. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACM4CBE will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. Units are designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the four (4) outputs.


https://www.alldataresource.com/assets/images_commscope/features.jpg

Enclosure

  • Wall mount enclosure for indoor use.
  • Dimensions 7.5"W x 8.5"H x 3.5"D (191 mm W x 216 mm H x 89 mm D).
  • 1/2" and 3/4" combination knockouts.



https://www.alldataresource.com/assets/images_commscope/features.jpg

Main Features

  • Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the four (4) outputs
  • Fire Alarm disconnect input options:
  • a) Normally open (NO) or normally closed (NC) dry contact input.
  • b) Polarity reversal input from FACP signaling circuit.
  • FACP output relay (form "C" contact rated @ 1A 28VDC not evaluated by UL).
  • Removable terminal blocks facilitate ease of installation.



https://www.alldataresource.com/assets/images_commscope/specs.jpg

Input

  • 12 to 24 volt AC or DC operation (setting not required), (0.4A @ 12volt, 0.2A @ 24 volt current consumption with all relays energized).
  • Main fuse is rated at 10A
  • Power supply input options:
  • a) One (1) common power input (board and lock power).
  • b) Two (2) isolated power inputs (one (1) for board power and one (1) for lock/accessory power).
  • Four (4) Access Control System trigger inputs:
  • a) Four (4) normally open (NO) inputs.
  • b) Four (4) open collector sink inputs.
  • c) Any combination of the above.



https://www.alldataresource.com/assets/images_commscope/specs.jpg

Output

  • Four (4) independently controlled Class 2 Rated PTC protected power-limited auto-resettable 2A outputs:
  • a) Four (4) Fail-Safe and/or Fail-Secure power outputs.
  • b) Four (4) dry form "C" 5A rated relay outputs
  • Output ratings:
  • PTCs are rated 2A each.
  • Note: Total output current is determined by the power supply, not to exceed a maximum of 10A total.



https://www.alldataresource.com/assets/images_commscope/specs.jpg

Visual Indicators

  • Red LEDs indicate outputs are triggered (relays energized).
  • Green LED indicates FACP disconnect is triggered.



https://www.alldataresource.com/assets/images_commscope/specs.jpg

Temperature

  • Operating 0 to 49° C (32 to 120° F ).
  • Storage - 20 to 70° C ( - 4 to 158° F).
  • Relative Humidity 85% +/- 5%
  • BTU/Hr. (approx.):
  • 12VDC or 12VAC: 2 BTU/Hr.
  • 24VDC or 24VAC: 3 BTU/Hr.



https://www.alldataresource.com/assets/images_commscope/packaging_weights.jpg

Weights (approximate)

Product Weight6.6 Lbs. (2.99 kg).
Shipping Weight6.7 Lbs. (3.039 kg).



https://www.alldataresource.com/assets/images_commscope/regulatorycompliance.jpg

Agency Listings

UL Listed For: Access Control System Units (UL294)https://iq.ulprospector.com/en/profile?e=1521
cUL Listed For: CSA Standard C22.2 No.205-M1983, Signal Equipmenthttps://iq.ulprospector.com/en/profile?e=152141



https://www.alldataresource.com/assets/images_commscope/pdf.jpg

Documents and Downloads

Altronix ACM4CBE Data SheetClick to View
Altronix ACM4CBE Data SheetClick to View
Altronix ACM4CBE Fichas TecnicasClick to View
Altronix ACM4CBE Installation InstructionsClick to View
Altronix ACM4CBE Altronix_ACM4CBE_Power_Controller_Guia_de_Instalacion.pdfClick to View
Altronix ACM4CBE CAD DrawingClick to View
Altronix ACM4CBE Lifetime WarrantyClick to View

Recently Viewed Items