Altronix AL802ULADA | NAC Power Supply, 2 Class A or 4 Class B Outputs, 24VDC @ 8A, 120VAC, Red BC400 Enclosure

Altronix AL802ULADA is an extremely cost effective voltage regulated remote NAC Power Extender. It may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC) expansion (supports ADA requirements) and providing auxiliary power to support system accessories.

• Wall mount enclosure for indoor use.
• Accommodates up to two (2) 12VDC/12AH Batteries.
• Dimensions 12.25"W x 15.5"H x 4.5"D (311 mm W x 394 mm H x 114 mm D).
• 1.125" and 1.375" combination knockouts.

• Voltage:
• 120VAC, 60Hz, 4A.
• Two (2) Class A or two (2) Class B inputs.
• Two (2) NC dry contact trigger inputs.
• Input Ratings (INP1 and INP2):
• 8-30VDC 6.5mA max from FACP.
• 12V 6.5mA, 24V 6.5mA from FACP.

• Voltage:
• 24VDC power-limited outputs.
• Current:
• 8A max. total alarm current.
• 2.5A max. current per output.
• Auxiliary:
• 1A.
• Other:
• Thermal and short circuit protection with auto reset.
• Filtered and regulated outputs.
• Programmable Supervised Indicating Circuit Outputs:
• Four (4) Class B, or TWO (2) Class A, or
• One (1) Class A and Two (2) Class B.

• Type: Sealed lead acid or gel type.
• Failover: Upon AC loss, instantaneous.

• AC Failure: Form “C” contacts.
• Battery: Form “C” contacts.

• AC Power (Green): Input voltage is present.
• DC Output (Red): Powered.
• Logic Board (Red and Green): Output status.