Altronix ACM4E | Access Power Controller, 4 Fused Relay Outputs, FAI, BC100 Enclosure
Altronix ACM4E | Access Power Controller, 4 Fused Relay Outputs, FAI, BC100 Enclosure

Altronix ACM4E | Access Power Controller, 4 Fused Relay Outputs, FAI, BC100 Enclosure

Part Number: 508619
0 Review(s)
Write a Review
Availability:
$109.80
Retail Price:$120.78
Your Savings:$10.98(9%)
  • Low prices.

    Price match guarantee

  • In-House Experts.

    We know our products

  • Easy Returns.

    Quick & Hassle Free

  • Superior Selection.

    Extensive product catalog

Altronix ACM4E converts one (1) 12 to 24 VAC or VDC input into four (4) independently controlled fuse protected outputs. These power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACM4E will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. Units are designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the four (4) outputs.


https://www.alldataresource.com/assets/images_commscope/features.jpg

Enclosure

  • Wall mount enclosure for indoor use.
  • Dimensions 7.5"W x 8.5"H x 3.5"D (191 mm W x 216 mm H x 89 mm D).
  • 1/2" and 3/4" combination knockouts.



https://www.alldataresource.com/assets/images_commscope/features.jpg

Main Features

  • Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the four (4) outputs
  • Fire Alarm disconnect input options:
  • a) Normally open (NO) or normally closed (NC) dry contact input.
  • b) Polarity reversal input from FACP signaling circuit.
  • FACP output relay (form "C" contact rated @ 1A 28VDC not evaluated by UL).
  • Removable terminal blocks facilitate ease of installation.



https://www.alldataresource.com/assets/images_commscope/specs.jpg

Input

  • 12 to 24 volt AC or DC operation (setting not required), (0.4A @ 12volt, 0.2A @ 24 volt current consumption with all relays energized).
  • Main fuse is rated at 10A
  • Power supply input options:
  • a) One (1) common power input (board and lock power).
  • b) Two (2) isolated power inputs (one (1) for board power and one (1) for lock/accessory power).
  • Four (4) Access Control System trigger inputs:
  • a) Four (4) normally open (NO) inputs.
  • b) Four (4) open collector sink inputs.
  • c) Any combination of the above.



https://www.alldataresource.com/assets/images_commscope/specs.jpg

Output

  • Four (4) independently controlled outputs:
  • a) Four (4) Fail-Safe and/or Fail-Secure power outputs.
  • b) Four (4) dry form "C" 5A rated relay outputs
  • c) Any combination of the above
  • Four (4) auxiliary power outputs (unswitched)
  • Output ratings:
  • Fuses are rated 2.5A each.
  • Note: Total output current is determined by the power supply, not to exceed a maximum of 10A total.



https://www.alldataresource.com/assets/images_commscope/specs.jpg

Visual Indicators

  • Red LEDs indicate outputs are triggered (relays energized).
  • Green LED indicates FACP disconnect is triggered.



https://www.alldataresource.com/assets/images_commscope/specs.jpg

Temperature

  • Operating 0 to 49° C (32 to 120° F ).
  • Storage - 20 to 70° C ( - 4 to 158° F).
  • Relative Humidity 85% +/- 5%
  • BTU/Hr. (approx.):
  • 12VDC or 12VAC: 2 BTU/Hr.
  • 24VDC or 24VAC: 3 BTU/Hr.



https://www.alldataresource.com/assets/images_commscope/packaging_weights.jpg

Weights (approximate)

Product Weight6.6 Lbs. (2.993 kg).
Shipping Weight6.7 Lbs. (3.039 kg).



https://www.alldataresource.com/assets/images_commscope/regulatorycompliance.jpg

Agency Listings

UL Listed For: Access Control System Units (UL294)https://iq.ulprospector.com/en/profile?e=1628
cUL Listed For: CSA Standard C22.2 No.205-M1983, Signal Equipmenthttps://iq.ulprospector.com/en/profile?e=152141



https://www.alldataresource.com/assets/images_commscope/pdf.jpg

Documents and Downloads

Altronix ACM4E Data SheetClick to View
Altronix ACM4E Data SheetClick to View
Altronix ACM4E Fichas TecnicasClick to View
Altronix ACM4E Installation InstructionsClick to View
Altronix ACM4E Altronix_ACM4E_Power_Controller_Guia_de_Instalacion.pdfClick to View
Altronix ACM4E CAD DrawingClick to View
Altronix ACM4E Lifetime WarrantyClick to View

Recently Viewed Items