Altronix Ebridge16CR | EoC 16 Port Receiver, 25Mbps per port, Passes silmultaneous composite video, 24/56VDC or 24VAC, Requires Compatible Transceiver, 1U

The eBridge16CR is a 16 channel ethernet over coax rack mount receiver. The eBridge16CR enables fast 10/100Base-T Ethernet digital communication to be transmitted over coax cable. This unit is designed to be used with eBridge1CT transceivers. This plug and play unit facilitates system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition the use of coax enables data transmission to be extended over 500m (over four times the 100m Ethernet maximum length), eliminating the need for repeaters. At the same time the units can combine Composite Video Signal with the Ethernet data enabling connection to an analog input on a monitor or matrix switch.

• Modular 1U standard EIA 19" rack mount chassis.
• Dimensions 19.12"W x 1.62"H x 8.5"D (486 mm W x 42 mm H x 216 mm D).

• Incorporates *sloc™ (Security Link over Coax) technology.

• 24VDC to 56VDC UL Listed Class 2 power supply (polarity not observed) or UL Listed 24VAC Class 2 plug-in transformer.

• 24VDC/1500mA, 56VDC/700mA, 24VAC/2200mA.

• Sixteen (16) RJ45 ethernet channels.
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair Cat-5 or higher structured cable.
• Distance: up to 100m.
• Speed: 10/100BaseT, half/full duplex, auto negotiation.

• Sixteen (16) BNC input channels.
• Sixteen (16) BNC composite video output channels.
• Distance: up to 500m.
• Connectivity: BNC, RG-59/U or similar.