Altronix HUBSAT42WP 4 PTC Passive UTP Transceiver Hub with Integral Camera Power w/4 HubWayAv Outdoor Enclosure

Altronix HubSat42WP Passive UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 4 camera channels in a wall mount enclosure. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC fixed or PTZ cameras. In addition, the unit features individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression. Optionally, the HubSat42WP can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cables back to the HubWay, HubWayLD or HubWayLDH Passive and Active UTP Transceiver Hubs. In addition, the HubSat42WP provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Features

Individual selectable 24VAC or 28VAC power outputs with OFF position

Unit provides up to 1 amp max. per channel not to exceed a total of 4 amp maximum current

Four (4) PTC proteceted outputs

Main fuse (internal) is rated at 3.5 amp/250V

Input 115VAC 60Hz, 1.25 amp