Altronix HUBWAY8CD | UTP Passive Transceiver Hub, 8 Channel, Video up to 750', Integrated 24/28VAC Power Supply, 115/220VAC, 1U

HubWay8CD Passive UTP Transceiver Hub with Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8 camera channels in a space saving 1U EIA 19" rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayAv2, HubWayDv or HubWayDvi Video Balun/ Combiners. In addition, the unit features individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression. An optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay8D. In addition, the HubSat4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

• Modular 1U standard EIA 19" rack mount chassis.
• Dimensions 19.12"W x 1.62"H x 8.5"D (486 mm W x 42 mm H x 216 mm D).

• Eight (8) power LEDs.
• Illuminated master power disconnect circuit breaker with manual reset.
• IEC 320 - 3-wire grounded line cord (detachable).

• 115VAC 60Hz, 1.5A.

• Eight (8) channels of video over twisted pair up to a distance of 228.6m (750 ft.) per channel.
• Eight (8) 75 ohm video outputs.

• RS422/RS485 data inputs.

• Unit provides up to 1A max. per channel not to exceed a total of 5A (150VA) maximum current.
• Individually selectable 24VAC or 28VAC isolated power outputs with OFF position.
• Class 2 Rated power-limited outputs.
• PTCs are rated @ 1A per channel.
• Surge suppression.