Altronix HubWayLD162 Active UTP Transceiver Hub with Integral Camera Power With sixteen (16) HubWayAv Video Balun/Combiners

Altronix HubWayLD162 Active UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 16 camera channels in a space saving 1U EIA 19” rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 3000 ft. max. per channel. Units are compatible with AC fixed or PTZ cameras when utilizing Altronix HubWayAv Video Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC fuse protected outputs with surge suppression. An optional HubSat4/4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWayLD16. In addition, the HubSat4/4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Features

Individual selectable 24VAC or 28VAC power outputs with OFF position.

Unit provides up to 1 amp max. per channel not to exceed a total of 10 amp (300VA) maximum current.

Blade fuses are rated @ 3 amp per channel.

Surge suppression.

Primary fuse (internal) is rated at 5 amp/250V.

Input 115VAC 50/60Hz, 4 amp or 230VAC 50/60Hz, 2.5 amp.

RS422/RS485 data input.

Sixteen (16) channels of video over twisted pair up to 3000 ft.

Sixteen (16) 75 ohm video outputs.

AC input power indicator.

Sixteen (16) individual power LED indicators.

Picture and Gain control.

Illuminated master power disconnect circuit breaker with manual reset.

IEC320 - 3-wire grounded line cord (detachable).

Rack, wall or shelf mount.

Optional HubSat4/4D allows transmission of up to four (4) video signals over a single CAT-5 or higher structured cable.

Includes sixteen (16) AC (HubWayAv) Video Balun/Combiners.

Modular 1U standard EIA 19” rack mount chassis