Altronix HubWayLD82I Active UTP Transceiver Hub with Integral Camera Power With Eight (8) Hubwayav Video Balun/Combiners, With Isolated Outputs

Altronix HubWayLD82 Active UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8camera channels in a space saving 1U EIA 19” rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 3000 ft. max. per channel. Units are compatible with AC fixed or PTZ cameras when utilizing Altronix HubWayAv Video Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC fuse protected outputs with surge suppression. An optional HubSat4/4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWayLD8. In addition, the HubSat4/4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Features

Individual selectable 24VAC or 28VAC power outputs with OFF position

Unit provides up to 1 amp max. per channel not to exceed a total of 5.5 amp (150VA) maximum current

Blade fuses are rated @ 3 amp per channel

Surge suppression

Primary fuse (internal) is rated at 5 amp/250V

Input 115VAC 50/60Hz, 2 amp or 230VAC 50/60Hz, 1.25 amp

RS422/RS485 data input

Eight (8) channels of video over twisted pair up to 3000 ft

Eight (8) 75 ohm video outputs

AC input power indicator

Eight (8) individual power LED indicators

Picture and Gain control

Illuminated master power disconnect circuit breaker with manual reset

IEC320 - 3-wire grounded line cord (detachable)

Rack, wall or shelf mount

Optional HubSat4/4D allows transmission of up to four (4) video signals over a single CAT-5 or higher structured cable

Includes eight (8) AC (HubWayAv) Video Balun/Combiners