Altronix HubWayLD83S Active UTP Transceiver Hub with Integral Camera Power w/eight (8) HubWayDv Video Balun/Combiners

Altronix new HubWayLD83S Active UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8 camera channels in a space saving 1U EIA 19" rack mount chassis which may be wall or shelf mounted. Video transmission range is up to 3000 ft. max. per channel. Units are compatible with DC fixed or PTZ cameras. An optional HubSat4 Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWayLD83S. In addition, the HubSat4 provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Features

Individual selectable 24VAC or 28VAC power outputs with OFF position.

Unit provides up to 1 amp max. per channel not to exceed a total of 5 amp (150VA) maximum current.

External automotive blade fuses.

Blade fuses are rated @ 3 amp per channel.

Surge suppression.

Picture and Gain control.

Main fuse (internal) is rated at 5 amp/250V

Input 115VAC 50/60Hz, 2 amp or 230VAC 50/60Hz, 1.25 amp

Two (2) data/PTZ inputs

Eight (8) channels of video over twisted pair up to 3000 ft

Eight (8) 75 ohm video outputs

AC input power indicator

Eight (8) individual power LED indicators

Illuminated master power disconnect circuit breaker with manual reset

IEC320 - 3-wire grounded line cord (detachable)

Rack, wall or shelf mount

Optional HubSat4 allows transmission of up to four (4) video signals over a single CAT-5 or higher structured cable

Includes eight (8) DC (HubWayDv) Video Balun/Combiners

Lifetime Warranty

Modular 1U standard EIA 19” rack mount chassis.