Altronix MAXIMAL1R | Access Power Controller w/ Power Supply/Charger, 16 Fused Relay Outputs, 12/24VDC @ 4A, 115VAC, 2U
Altronix MAXIMAL1R | Access Power Controller w/ Power Supply/Charger, 16 Fused Relay Outputs, 12/24VDC @ 4A, 115VAC, 2U

Altronix MAXIMAL1R | Access Power Controller w/ Power Supply/Charger, 16 Fused Relay Outputs, 12/24VDC @ 4A, 115VAC, 2U

Part Number: ALT-MAXIMAL1R
0 Review(s)
Write a Review
Availability:
$391.84
Retail Price:$414.20
Your Savings:$22.36(5%)
  • Low prices.

    Price match guarantee

  • In-House Experts.

    We know our products

  • Easy Returns.

    Quick & Hassle Free

  • Superior Selection.

    Extensive product catalog

Maximal1R rack mount access power controller distributes and switches power to access control systems and accessories. It converts a 115VAC 50/60Hz input into sixteen (16) independently controlled 12VDC or 24VDC fuse protected outputs. Outputs are activated by an normally open (NO) or normally closed (NC) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. This unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the outputs.


https://www.alldataresource.com/assets/images_commscope/features.jpg

Enclosure

  • Modular 2U standard EIA 19" rack mount chassis.
  • Dimensions 19.12"W x 3.25"H x 8.5"D (486 mm W x 83 mm H x 216 mm D).
  • Allow 1/2U space on top and bottom of the unit for ventilation.



https://www.alldataresource.com/assets/images_commscope/specs.jpg

Input

  • 115VAC 60Hz., 1.9A.
  • Normally closed [NC] or normally open [NO] dry contact inputs (switch selectable).



https://www.alldataresource.com/assets/images_commscope/specs.jpg

Outputs

  • 12VDC @ 4A or 24VDC @ 3A total output current.
  • Sixteen (16) fuse protected outputs.
  • Maximum current per ACM8R-M output is 2.5A.
  • Individually selectable Mag Lock/Strike (Fail-Safe, Fail-Secure) solid state fuse protected outputs.
  • Thermal and short circuit protection with auto reset.



https://www.alldataresource.com/assets/images_commscope/specs.jpg

Fire Alarm Interface

  • Latching or Non-Latching fire alarm reset switch individually selectable for each output.
  • Remote reset capability for latching Fire Alarm Interface mode
  • Fire Alarm disconnect input options:
  • a) Normally open [NO] or normally closed [NC] dry contact input.
  • b) Polarity reversal input from FACP signaling circuit.



https://www.alldataresource.com/assets/images_commscope/specs.jpg

Visual Indicators

  • Individual Output Status LEDs located on the front panel.



https://www.alldataresource.com/assets/images_commscope/specs.jpg

Battery Backup

  • Built-in charger for sealed lead acid or gel type batteries (if batteries are required install separate enclosure).
  • Automatic switch over to stand-by battery when AC fails.
  • Zero voltage drop when unit switches over to battery backup (AC failure condition).



https://www.alldataresource.com/assets/images_commscope/packaging_weights.jpg

Weights (approximate)

Product Weight10.7 Lbs. (4.85 kg).
Shipping Weight12.7 Lbs. (5.76 kg).



https://www.alldataresource.com/assets/images_commscope/pdf.jpg

Documents and Downloads

Altronix MAXIMAL1R Data SheetClick to View
Altronix MAXIMAL1R Data SheetClick to View
Altronix MAXIMAL1R Fichas TecnicasClick to View
Altronix MAXIMAL1R Installation InstructionsClick to View
Altronix MAXIMAL1R Altronix_MAXIMAL1R_Power_Controller_Installation_Instructions_prior_to_Feb._9,_2015.pdfClick to View
Altronix MAXIMAL1RGuia de InstalacionClick to View
Altronix MAXIMAL1R Lifetime WarrantyClick to View

Recently Viewed Items