Altronix NETWAY16 | Midspan Injector, 16 Port, 10/100, PoE/PoE+, 300W, 115VAC

NetWay16 Midspans provide power and pass data (video) for PoE compliant cameras/devices. Sixteen ports in a space saving 1U EIA 19" rack mount chassis. Cameras/devices may be located up to 100m from the NetWay unit. A NetWayXT repeater module can be utilized to extend the distance an additional 100m for a total range of up to 200m. A maximum range of 600m is possible using multiple repeaters, based on camera/device port requirement. NetWay Midspans are capable of supporting non-PoE compliant fixed and PTZ IP cameras by utilizing NetWay1512 or NetWay3012 adapters.

• Modular 1U standard EIA 19" rack mount chassis.
• Dimensions 19.12"W x 1.62"H x 8.5"D (486 mm W x 42 mm H x 216 mm D).

• Easy plug and play installation.
• Safe and cost effective power distribution over CAT5/5E/6 LAN infrastructure.
• Automatic detection and protection of legacy non-PoE cameras.
• Port status LED indicators.
• Illuminated master power disconnect circuit breaker with manual reset (switch).
• IEC 320 - 3-wire grounded line cord (detachable).

• 115VAC 50/60Hz, 4.9A.
• Primary fuse (internal) is rated at 5A/250V.

• Unit provides up to 30W max. full power per port.
• Total power: 300W.
• IEEE 802.3af (PoE) and IEEE 802.3at (PoE +) compliant.
• Short circuit protection.

• Auto detection and protection of legacy non-PoE cameras/edge devices.

• Operating: - 20° C to 40° C ( - 4° F to 104° F).
• Storage: - 20° to 70° C ( - 4° F to 158° F).
• Relative Humidity 85% +/- 5%.
• BTU/Hr. (approx.): 154 BTU/Hr.
• System AC input VA requirement: 563.5VA.