Altronix NETWAY16M | Midspan Injector, 16 Port, 10/100, PoE/PoE+, 300W, 115VAC, Shutdown Trigger, Web Browser

Altronix NetWay16M Managed Midspans provide power and pass data for PoE compliant cameras/edge devices. Cameras/edge devices may be located up to 100m from the NetWay unit. A NetWayXT repeater module can be utilized to extend the distance an additional 100m for a total range of up to 200m. A maximum range of 600m is possible using multiple repeaters, based on camera/device port requirement. NetWay Managed Midspans are capable of supporting non-PoE compliant fixed and PTZ IP cameras utilizing NetWay1512 or NetWay3012 adapters.

• Modular 1U standard EIA 19" rack mount chassis.
• Dimensions 19.12"W x 1.62"H x 8.5"D (486 mm W x 42 mm H x 216 mm D).

• LAN or laptop connection enables programming of PoE shutdown and port monitoring.
• User interface.
• Illuminated master power disconnect circuit breaker with manual reset (switch).
• Individual port status LEDs.
• IEC 320 - 3-wire grounded line cord (detachable).

• 115VAC 60Hz, 4.9A.

• Sixteen (16) ports of cameras/edge devices over ethernet (CAT5) cable up to a distance of 100m per port.
• Unit provides up to 30W max. full power per port.
• Total power: 300W.
• IEEE 802.3af (PoE) and IEEE 802.3at (PoE +) compliant.
• Short circuit protection.

• Programmable PoE shutdown for each port. Utilized to reset cameras/edge devices.
• Auto detection and protection of legacy non-PoE cameras/edge devices.

• Operating:
• UL60950-1: - 20° C to 40° C (-4° F to 104° F).
• UL294: - 20° C to 49° C (-4° F to 120.2° F).
• Storage: - 20° C to 70° C (-4° F to 158° F).
• Relative Humidity 85% +/- 5%.
• BTU/Hr. (approx.): 154 BTU/Hr.
• System AC input VA requirement: 563.5VA.