Altronix NETWAY8 | PoE Midspan, 8 Port, 10/100, 30W max per port (150W total power), 115VAC Input

Altronix NetWay8 Midspan injector provides power and passes data for PoE and PoE+ compliant cameras/edge devices. Cameras/edge devices may be located up to 100m from the NetWay unit. A NetWayXT (PoE) or NetWayXTX (PoE+) repeater module can be utilized to extend the distance an additional 100m for a total range of up to 200m. A maximum range of 600m is possible using multiple repeaters, based on camera/device port requirement. NetWay Midspans are capable of supporting non-PoE compliant fixed and PTZ IP cameras utilizing NetWay1512 or NetWay3012 adapters.

• Modular 1U standard EIA 19" rack mount chassis.
• Dimensions 19.12"W x 1.62"H x 8.5"D (486 mm W x 42 mm H x 216 mm D).

• Easy plug and play installation.
• Safe and cost effective power distribution over CAT5/5E/6 LAN infrastructure.
• Automatic detection and protection of legacy non-PoE cameras.
• Port status LED indicators.
• Illuminated master power disconnect circuit breaker with manual reset (switch).
• IEC 320 - 3-wire grounded line cord (detachable).

• 115VAC 50/60Hz, 2A.
• Primary fuse (internal) is rated at 5A/250V.

• Unit provides up to 30W max. full power per port.
• Total power: 150W.
• IEEE 802.3af (PoE) and IEEE 802.3at (PoE +) compliant.
• Short circuit protection.

• Auto detection and protection of legacy non-PoE cameras/edge devices.

• Operating: - 20° C to 40° C ( - 4° F to 104° F).
• Storage: - 20° C to 70° C ( - 4° F to 158° F).
• Relative Humidity 85% +/- 5%.
• BTU/Hr. (approx.): 77 BTU/Hr.
• System AC input VA requirement: 230VA.
• Operating Altitude: - 304.8 to 3,048m.