Altronix T2MK34 | 4-Door Altronix/Mercury Access and Power Integration Kit

Altronix T2MK34 kit consists of Trove2 enclosure and TM2 Altronix & Mercury backplane with 12VDC or 24VDC (factory set at 24VDC) @ 6A power supply/charger, 12VDC voltage regulator, eight (8) fuse protected output dual voltage power distribution module and four (4) fuse protected output access control module. This kit also accommodates various combinations of Mercury* boards for up to four (4) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.*Also compatible with these authentic Mercury partners:AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls, Kastle, Keri Systems, Lenel/S2, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic Video Insight, Quintron, RS2, Schneider Electric, Vanderbilt

Altronix - T2MK34 - Overview

• AL600ULXB Power Supply/Charger
• Input
• Voltage: 115VAC, 60Hz, 3.5A max.
• Fusing: 5A / 250V.
• Output
• Voltage: 12VDC or 24VDC selectable.
• Current: 6A @ 12VDC or 24VDC continuous max.
• Other: Overvoltage protection. Filtered and regulated.
• Battery Backup (not included)
• Capacity: 7AH / 12VDC (up to 4 within enclosure); 40 AH / 65 AH (requires separate enclosure).
• Type: Sealed lead acid or gel type.
• Failover: Upon AC loss, instantaneous.
• Supervision
• AC Failure: Form "C" contacts.
• Battery: Form "C" contacts.
• Indicators LED
• Input: 115VAC is present.
• DC Output: Powered.
• Battery: Discharged or not connected.
• PDS8 Dual Input Power Distribution Module
• Input
• Voltage: 12VDC from VR6 and 24VDC from AL600ULXB.
• Input Fuse: 10A / 250V.
• Outputs
• Voltage: 12VDC and/or 24VDC.
• Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2.
• Individual outputs may be set to OFF position for servicing.
• Outputs Ratings
• Fuses: 3A / 32V.
• Indicators LED
• DC Output: Eight (8) individual output LEDs.
• Green: 12VDC
• Red: 24VDC.
• VR6 Voltage Regulator
• Input
• Voltage: 24VDC from AL600ULXB.
• Output
• Voltage: 12VDC.
• Current: 6A continuous.
• Other: Surge suppression.
• Indicators LED
• Input: 24VDC is present.
• Output: Powered.
• ACM4 Access Power Controller
• Input
• Voltage: 24VDC from AL600ULXB.
• Input Fuse: 10A / 32V.
• Outputs
• Voltage: 24VDC.
• Four (4) independently controlled 2.5A outputs:
• a) Four (4) Fail-Safe and/or Fail-Secure power outputs.
• b) Four (4) dry form "C" 5A rated relay outputs.
• c) Any combination of the above.
• Four (4) auxiliary power outputs (unswitched).
• Outputs Ratings
• Fuses: 3A / 32V.
• Indicators (LED)
• Red LEDs: Outputs are triggered (relays energized).
• Green LED: FACP disconnect is triggered.
• Environmental
• Temperature
• Operating: 0° C to 49° C (32° F to 120° F).
• Storage: - 20° C to 70° C ( - 4° F to 158° F).
• Relative Humidity
• Relative Humidity 85% +/- 5%.
• BTU/Hr (approx.):
• 87 BTU/Hr.

Altronix - T2MK34 - Features

• Wall mount enclosure for indoor use.
• Accommodates up to four (4) 12VDC/12AH Batteries.
• 3/4" and 1" combination knockouts.
• Voltage: 12VDC or 24VDC selectable
• Current: 6A @ 12VDC or 24VDC continuous max
• Other: Overvoltage protection. Filtered and regulated
• Capacity: 7AH / 12VDC (up to 4 within enclosure); 40 AH / 65 AH (requires separate enclosure)
• Type: Sealed lead acid or gel type

Altronix - T2MK34 - Specifications

UNSPSC Code	43211700.0
Sales Category	Power Supply
Agency Listings	CE Compliant
Dimensions (approximate)	21.5"W x 27.25"H x 6.5"D (546.1 mm W x 692.15 mm H x 165.1 mm D).

Altronix - T2MK34 - Weights (approximate)

Product Weight	39.2 Lbs. (17.78 kg).
Shipping Weight	43 Lbs. (19.5 kg).

Altronix - T2MK34 - Documents and Downloads

Altronix T2MK34 Data Sheet	Click to View
Altronix T2MK34 Installation Instructions	Click to View