Commscope MT050B-81026 DryLine Dehydrator, Low-pressure membrane, 19 in rack mountable, 3.0-5.0 psig, with summary alarm, 240 V AC, 60/50 Hz
Commscope MT050B-81026 DryLine Dehydrator, Low-pressure membrane, 19 in rack mountable, 3.0-5.0 psig, with summary alarm, 240 V AC, 60/50 Hz

Commscope MT050B-81026 DryLine Dehydrator, Low-pressure membrane, 19 in rack mountable, 3.0-5.0 psig, with summary alarm, 240 V AC, 60/50 Hz

Part Number: 469247
0 Review(s)
Write a Review
Availability:
$2,939.69
Retail Price:$3,183.87
Your Savings:$244.18(8%)
  • Low prices.

    Price match guarantee

  • In-House Experts.

    We know our products

  • Easy Returns.

    Quick & Hassle Free

  • Superior Selection.

    Extensive product catalog



  • Complies with applicable standards
  • Provides very stable low temperature performance
  • Fiber Counts 2 48
  • Smaller gel free buffer tubes
  • Arid-Core Construction
  • Stranded Loose Tube Construction
  • Provides performance equivalent to gel-filled cable designs

Specification Description

Dehydrator
Volume Capacity (Minimum): 0.0 L (0.0 Sq ft)
Flow Rate (Nominal): 0.12 scfm (3.40 slpm)
Port Count: 1
Operating Temperature: -10 to 50 deg C (14 to 122 deg F)
Volume Capacity (Maximum): 1699.0 L (60.0 Sq ft)
Power Consumption (Average): 190 Watt
Suggested Circuit Breaker Size: 20 Amp
Voltage: 240 Volt AC +/-10%
Regulated Output Pressure (Maximum): 3 psig (21 kPa)
Port Type: 3/8 Inch PE Tube
Includes: 3/8 Inch Polyethylene Tubing, 90 Degree Elbow Fitting, Instruction Sheet, Male Connector Fitting, Needle Valve, Power Cord, Power Cord Connector Lock, PTFE Tape, Screws
Rack Units: 4
Power Frequency: 60/50 Hz
Low-Pressure Alarm: 68 mbar, 7 kPa, 1 psig
Voltage Type: AC
Dehydrator Type: Automatic Membrane
Dew Point: Better Than -45 deg C (-50 deg F) At 95% RH At +40 deg C (+104 deg F)
Rack Type: EIA 19 Inch
Circuit Breaker Requirement: Electrical Connections Require Separate Circuits for Dehydrator Installation
Power Cord: Europe Power Cord With Stripped Leads, USA power cord
Regulated Output Pressure Type: Factory Set
Mount Type: Floor, Rack, Shelf
Alarm Contact Rating: Form C Dry Contacts, 2 Amp at 30 Volt DC
Power Phase: Single
Alarm Type: Summary
Dimension: 17.3 Inch Width x 16.5 Inch Depth x 6.8 Inch Height (439.4 mm x 419.1 mm x 172.7 mm)


Type DEHYDRATOR
UNSPSC Code 43223100

Recently Viewed Items