Comnet FVR401M1 4-Channel Digitally Encoded Video Receiver, Multimode, 1 Fiber
Comnet FVR401M1 4-Channel Digitally Encoded Video Receiver, Multimode, 1 Fiber

Need more information about this product?

Comnet FVR401M1 4-Channel Digitally Encoded Video Receiver, Multimode, 1 Fiber

Part Number: CON-FVR401M1
0 Review(s)
Write a Review
Retail Price:$1,563.82
Your Savings:$157.44(10%)
  • Low prices.

    Price match guarantee

  • In-House Experts.

    We know our products

  • Easy Returns.

    Quick & Hassle Free

  • Superior Selection.

    Extensive product catalog

The ComNet™ FVT/FVR401 multiplexer simultaneously transmits four channels of video over one optical fiber utilizing state-of-the-art 10-bit digital encoding and decoding for high-quality video transmission that meets the requirements of EIA RS-250C for short-haul video transmission. These environmentally hardened units are ideal for use in unconditioned roadside or out-of-plant installations. These units are completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. These units are interchangeable between stand-alone or card mount configurations.

  • 10-bit digital video transmission: transmits 4 real-time color video signals on one optical fiber
  • 4-Channel Video Receiver (1310 nm)
  • Exceeds all requirements for EIA RS-250C short-haul
  • Transmission: Extremely high video performance
  • Exceptionally low video distortion with zero Performance Variation vs. Optical Path Loss
  • Ideally suited to networks requiring multiple physical layers where video degradation may be a problem
  • Compatible with all NTSC, PAL, or SECAM CCTV camera systems
  • Wide optical dynamic range: optical attenuators are never required
  • NTCIP compatible
  • Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
  • Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events.
  • Robust design ensures extremely high reliability in unconditioned out-of-plant environments
  • Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
  • Max Distance 2 km (1.2 miles)
  • Automatic resettable solid-state current limiters

  • Manufacturer Comnet Communication Networks
  • Category New
  • Video Input: 1 volt pk-pk (75 ohms)
  • Overload: >1.5V pk-pk
  • Input/Output Channels: 4
  • Bandwidth (minimum): 10 Hz - 6.5 MHz per channel
  • Differential Gain: <4%
  • Differential Phase: <0.7Ú
  • Tilt: <1%
  • Signal-to-Noise Ratio (SNR): 57 dB Typical
  • Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
  • Operating Temp: -40° C to +75° C
  • Storage Temp: -40° C to +85° C
  • Relative Humidity: 0% to 95% (non-condensing)
  • Recently Viewed Items