ELK ELK-9200 HD Automation Relay, DPDT, 60A Contacts, 110VAC Input

The ELK-9200 from ELK is a HD Automation Relay, DPDT, 60A contacts, 110VAC input. The ELK-9200 is a Heavy Duty Relay/Contactor inside a lockable metal enclosure. It is designed for remotely controlling high current devices such as electric water heaters, pumps, motors, gates, etc. The energizing coil of the 9200 is 110 VAC, however its relay contacts are capable of switching 220 VAC at up to 60 Amps of current. The relay coil is prewired with a three (3) prong plug-in cord. This plug is compatible with virtually any appliance style automation module (purchased separately) including: UPB, Insteon, ZWave, Zigbee, X10, etc. A simple remote command can be sent to activate the lower current automation module, which in turn then activates the higher current contacts of the 9200 relay. This permits the safe and easy On/Off switching of up to 60 Amps of electrical current.

Features

Pre-Wired Terminal Lugs for easy Installation

110 VAC Plug Cord for Energizing the Relay Coil

Heavy Duty "Lockable" Metal Enclosure

60 Amp Long Life Double Pole Relay Contacts

Relay Suitable for a 110 VAC or 220 VAC Load

Ideal for Water Heaters, Motors, Pumps, etc

Heavy Duty "UL Recognized" Relay

Specs

Manufacturer Elk Products Inc

Condition New

Operating Coil Voltage 110 VAC

Coil Current Draw <35 Contacts Rated for: 60 Amps AC maximum

Metal Enclosure Size 12" x 12" x 3.375" * Not suitable for wet locations

Color White