ELK ELK-M1XEP Ethernet Port Interface

The ELK-M1XEP from ELK is an Ethernet Port Interface. The ELK-M1XEP is an Ethernet Device Server with a RS-232 Serial Port Interface. It may be used to connect a Control in the M1 Family to an Ethernet network using TCP-IP protocol for programming, remote control and monitoring. It features a secure embedded web server, with a user interface built on a Java applet, and email event notification. A software setup utility is built into ElkRP (version 1.5.0 or later) for configuring the connection setup, network password, etc. The M1XEP is factory defaulted to obtain a dynamic IP address from a DHCP server (i.e. Ethernet switch, cable modem, etc.), however it may also be setup with a static IP address.

Features

Web server with embedded Java applet "M1 Virtual Keypad"

Secure connection with password protection and HTTPS encryption

Flash Memory for Firmware Updating

Event notification via E-Mail (SMTP)

Internet Monitoring and Reporting Capability

URL Updating using Dynamic DNS

Federal Information Processing Standards (FIPS) 128 bit encryption

Integrated 802.3 compliant 10/100 Mbit network interface

RS232, DB9M 9-pin serial port connection

Connects to the M1 RS-232 Serial port (Port 0)

RJ45 8-pin Network Jack

2.1mm barrel type power connector (center positive)

LED Indicators for Power, Link, and Data

Specs

Manufacturer Elk Products Inc.

Condition New

Operating Voltage 12 Volts D.C. from Elk-P1216 Plug-in Power Supply

Current Draw approx. 300 mA

Housing Dimensions 4.25" x 6.375" x 2.125"

Circuit Board Dimensions 2.25" x 3.95"