ELK ELK-MM220 Controller, 2 Input, 2 Output, Programmable

The ELK-MM220 from ELK is a Magic Module™ (ELK-MM220) is a two digital input, two form C relay output programmable controller. It may be used as a stand alone field programmable controller in a vast array of applications from timers, single zone security system, pulse stretcher, simple process controllers, etc. The MM220 comes factory pre-programmed as a single zone security system and can be re-programmed by using a personal computer. The MM220 program is stored into re-programmable Electrically Erasable Programmable Read Only Memory (EEProm memory). The ELK-MB485 Data Bus Interface for Magic Module™ Series and the ELK-MM443 Magic Module™ Programmable Controller, 4 input, 4 output, iButton™ and X10® interface are required to program the ELK-MM220. Also available. ELK-MM443, a 4 analog/digital input, 4 relay output programmable controller.

Features

Two Digital Inputs

Two Relay Outputs (jumper programmable "transistor open collector" output on relay 2)

4096 program bytes using SIMPLE programming language

4 general purpose Counters, range 0 to 255 counts

4 general purpose Timers, range 1/10 second to over 255 hours

Program stored in non-volatile EEProm memory

Surface Mount ABS Enclosure with Snap-On Cover

Single Zone Security System

Restricted Area Door Annunciator

Boat Alarm

Specs

Manufacturer Elk Products Inc.

Category New

Operating Voltage 9.5-15 Volts DC

Current Draw 10 ma. Nominal, 70 ma. Maximum with both relays active

Enclosure Black ABS Plastic: 4.5" x 3" x 1.2"