GE Security DE7200-MM, Optical Ethernet Repeater, (2) 1300Nm

The DE7200-MM from GE Security is an Optical Ethernet Repeater, (2) 1300Nm. The IFS DE7200 Series Ethernet 2 port transceiver is designed to transmit and receive 10/100 Mbps data over multimode, singlemode optical fiber, or electrical. The IFS DE7200 Series will function as a 10 Mbps Ethernet link, or as a 100 Mbps Ethernet link without any adjustments. The DE7200 Series is environmentally hardened to operate in extreme temperatures. Loss of optical link contact closure for remote alarm sensing. Status indicating LED’s for power and data rate are present at the RJ-45 connector. At the fiber optic transceiver end, link and data LEDs provide operational status. Plug-and-play design ensures ease of installation requiring no optical adjustments. The modules are available in stand-alone only.

Features

10/100 Mbps Ethernet

10/100 TX Electrical Port

100 FX Optical Port

Full Duplex or Half Duplex Data

Distances up to 37 km (23 miles)

Designed to Meet Full Compliance with the Environmental

Requirements (Ambient Operating Temperature, Mechanical Shock

Vibration, Humidity with Condensation, High-Line/Low-Line Voltage

Conditions and Transient Voltage Protection) of NEMA TS-1/TS-2

Multimode and Singlemode Versions Available

SC Optical Connectors Standard

Power, Transmit and Receive Data Status LED Indicators

Loss of Optical Link Contact Closure

IEEE 802.3 Compliant

Specs

Manufacturer Utc Fire & Security

Condition New

Data Interface Ethernet

Data Rate 10/100 Mbps, IEEE 802.3 Compliant

Operating Mode Full Duplex or Half Duplex

Number Of Fibers 2 , 4

Power Connectors Terminal Block with Screw Clamps

Data Connectors RJ-45

Voltage Regulation Solid-State; independent on each board

Current Protection Automatic Resettable Solid-State Current Limiters

Circuit Board Meets IPC Standard

Operating Temp -40° C to +74° C

Storage Temp -40° C to +85° C

Relative Humidity 0% to 95% (non-condensing)