GE Security RLCDCR Remote LCD Text annunciator with Common Controls English Red
GE Security RLCDCR Remote LCD Text annunciator with Common Controls English Red

GE Security RLCDCR Remote LCD Text annunciator with Common Controls English Red

Part Number: GEC-RLCDCR
0 Review(s)
Write a Review
Retail Price:$372.19
Your Savings:$14.80(4%)
  • Low prices.

    Price match guarantee

  • In-House Experts.

    We know our products

  • Easy Returns.

    Quick & Hassle Free

  • Superior Selection.

    Extensive product catalog

GE R-Series Annunciators are high-performance remote annunciators that provide status indication and common controls for compatible fi re alarm control panels, including iO-Series small analog fi re alarm systems. This family of annunciators offers LCD or LED annunciation. Models are available with and without common controls. There are three R-Series annunciator models, plus an LED-based expander. Up to two expanders can be connected to any annunciator. The expander includes 24 pairs of LEDs that extend the capabilities of any of the annunciators. All annunciator models include status LEDs and an internal buzzer. Two models have an LCD text display, and one has 16 pairs of LEDs for zone annunciation. LCD models feature a large back-lit, four by twenty character per line, super-twist liquid crystal display. R-Series annunciators and expanders are mounted on a standard 4-inch square electrical box, using the included mounting ring. They can also be surface mounted in locking steel enclosures. Three different enclosures are available. A keyswitch and graphic annunciator interface is available for R-Series annunciator applications. The keyswitch enables or disables common controls. The graphic annunicator interface cards supports 32 LEDs and 16 switches on the graphic panel display.

  • LCD models feature large 4 x 20 character backlit LCD display
  • LED models provide 16 pairs of LEDs for zone annunciation
  • Available expander extends capability with 24 pairs of LEDs
  • Up to two expanders may be wired to each annunciator
  • Status LEDs and internal buzzer standard on all models
  • Common controls available for LED and LCD display models
  • Available keyswitch for disabling common controls
  • Standard 4-inch square electrical box mounting
  • Class B or Class A RS485 wiring standard
  • One-, two-, and three-position enclosures available
  • Graphic Annunciator interface, includes common control, indicators and 32 LEDS
  • No programing required, set the address and unit recieves all information from panel

  • Manufacturer Utc Fire & Security
  • Condition New
  • Operating voltage 24 VDC, continuous.
  • Standby current 99 mA
  • Alarm current 115 mA
  • RS-485 communications Class A or Class B, 9600 baud
  • Data wiring 18 to 14 AWG (1.0 to 2.5 sq mm) twisted pair (6 twists per foot minimum). Maximum wire run is 4,000 ft. (1,219 m)
  • Remote key switch circuit 5 VDC at 1 mA, power-limited, unsupervised
  • Ground fault impedance 0
  • Power wiring 18 to 14 AWG (1.0 to 2.5 sq. mm)
  • Display area 4 lines of 20 characters each
  • Dimensions (H x W x D) 5-5/8 x 8-1/2 x 1-1/2 in. (14.3 x 21.4 x 3.8 cm)
  • Mounting North American 4-inch square electrical box or listed enclosure
  • Operating environment: Temperature 32 to 120°F (0 to 49°C) Humidity: 0 to 93% RH, noncondensing at 90°F (32°C)
  • Related Items

    Recently Viewed Items