GE Security RLED24 Remote Annunciator LED Expander for LCD

GE R-Series Annunciators are high-performance remote annunciators that provide status indication and common controls for compatible fi re alarm control panels, including iO-Series small analog fi re alarm systems. This family of annunciators offers LCD or LED annunciation. Models are available with and without common controls. There are three R-Series annunciator models, plus an LED-based expander. Up to two expanders can be connected to any annunciator. The expander includes 24 pairs of LEDs that extend the capabilities of any of the annunciators. All annunciator models include status LEDs and an internal buzzer. Two models have an LCD text display, and one has 16 pairs of LEDs for zone annunciation. LCD models feature a large back-lit, four by twenty character per line, super-twist liquid crystal display. R-Series annunciators and expanders are mounted on a standard 4-inch square electrical box, using the included mounting ring. They can also be surface mounted in locking steel enclosures. Three different enclosures are available. A keyswitch and graphic annunciator interface is available for R-Series annunciator applications. The keyswitch enables or disables common controls. The graphic annunicator interface cards supports 32 LEDs and 16 switches on the graphic panel display.

Features

LCD models feature large 4 x 20 character backlit LCD display

LED models provide 16 pairs of LEDs for zone annunciation

Available expander extends capability with 24 pairs of LEDs

Up to two expanders may be wired to each annunciator

Status LEDs and internal buzzer standard on all models

Common controls available for LED and LCD display models

Available keyswitch for disabling common controls

Standard 4-inch square electrical box mounting

Class B or Class A RS485 wiring standard

One-, two-, and three-position enclosures available

Graphic Annunciator interface, includes common control, indicators and 32 LEDS

No programing required, set the address and unit recieves all information from panel

Specs

Manufacturer Utc Fire & Security

Condition New

Operating voltage: 24 VDC, continuous.

Standby current: 6 mA

Alarm current: 34 mA

RS-485 communications: Class A or Class B, 9600 baud

Data wiring: 18 to 14 AWG (1.0 to 2.5 sq mm) twisted pair (6 twists per foot minimum). Maximum wire run is 4,000 ft. (1,219 m)

Remote key switch circuit: 5 VDC at 1 mA, power-limited, unsupervised

Ground fault impedance: 0

Power wiring: 18 to 14 AWG (1.0 to 2.5 sq. mm)

Display area: 4 lines of 20 characters each

Dimensions (H x W x D): 5-5/8 x 8-1/2 x 1-1/2 in. (14.3 x 21.4 x 3.8 cm)

Mounting: North American 4-inch square electrical box or listed enclosure

Operating environment: Temperature: 32 to 120°F (0 to 49°C) Humidity: 0 to 93% RH, noncondensing at 90°F (32°C)