HID 5385AGS00 MultiProx Reader

Cost effective replacement and upgrade of existing Schlage/Westinghouse (WSE) systems without replacing existing WSE cards and installed coax wiring. Simultaneously reads both HID and most WSE analog proximity cards. Provides HSM to replace WSE systems MSM.

Features

Cost effective: The MultiProx reader is quick and easy to install. Meet expanding card requirements with the introduction of low-cost, HID proximity cards to existing Schlage access cards populations

Mounting: The MultiProx reader directly replaces the existing Schlage sensor.No modifications to existing mounting hardware, mounting holes and cable locations are required

Audiovisual indication: When a proximity card is presented to the reader, the red LED flashes green and the beeper sounds.The multicolor LED and beeper also can be controlled individually by the host system

Indoor/outdoor design: The MultiProx reader is sealed in a rugged, weatherized polycarbonate enclosure designed to withstand harsh environments as well as provide a high degree of vandal resistance

Easily interfaced: The MultiProx reader interfaces with all existing Wiegand protocol access control systems.The facility code and card numbers of the Schlage cards are represented in a 26-bit or 32-bit Wiegand format

Specs

Manufacturer Hid Corporation - Usa

Category New

Dimensions: 7.5" x 7.5" x 0.8" (19 x 19 x 2 cm )

Operating -40° to 150° F (-40? to 65? C)

Storage -40° to 185° F (-40° to 85° C)

Operating Humidity: 5-95% relative humidity noncondensing over specified temperature