Hoffman E4PBAM | Sloped-Front Pushbutton Enclosures, Type 12, 4PB x 22.5mm, Gray, Steel

These Sloped Front Pushbutton Enclosures are designed to hold 30.5-mm or 22.5-mm pushbuttons and switches where slanted control surfaces are desired.

Main Features

• Seams continuously welded and ground smooth
• Captivated cover screws thread into sealed wells
• Grounding stud on body
• Bonding provision on cover
• Oil-resistant gasket
• Factory stamped 4-way pushbutton holes
• Enclosures 7.25 x 6.25 x 6.75 in. (184 x 159 x 171 mm) and larger have internal detachable hinge to hold cover open during wiring, yet permit immediate removal
• External welded-on mounting brackets for easy installation
• 30.5-mm or 22.5-mm size holes

Industry Standards

• UL 508A Listed; Type 12, 13; File No. E61997
• cUL Listed per CSA C22.2 No. 94; Type 12, 13; File No. E61997
• NEMA/EEMAC Type 12, 13
• CSA File Number 42186: Type 12
• IEC 60529, IP65

Specifications

Height	3.5 in / 89 mm
Width	10 in / 254 mm
Depth	4.84000015 in / 123 mm
Protection Rating	NEMA Type 12; NEMA Type 13; IP65
Material	Mild Steel
Hole Size	22.5 mm mm
Hole Quantity	4
Mounting	4.03 x 9.12 in / 102 x 232 mm
Overall Dimensions	4.53 x 10.22 in / 115 x 260 mm
Color	Gray
Color Code	ANSI 61
Finish	Powder Coated
BULLETIN NUMBER	PB1

Documents and Downloads

Hoffman E4PBAM CERT-00182	Click to View
Hoffman E4PBAM Declaration of Compliance	Click to View
Hoffman E4PBAM Single-Sided Shelf Repainting Instructions	Click to View
Hoffman E4PBAM Data Sheet	Click to View