Hoffman F88T112GVPWK | Straight Section, Lay-in Flat-Cover, Type 1, 8.00x8.00x12.00, Gray, Steel, With KOs

Lay-in Flat-Cover Type 1 Straight Sections are used for enclosing wire and cable in wireway runs. Sections are completely open on one side so wires and cables can be laid in along wireway run. No pulling through of wires or cables prevents damage to insulation that often occurs in a pull-through wiring system. Flat cover design allows for mounting flush with walls or ceilings. Keyhole screw slots on flat covers provide easy access. Sections are available in lengths from 12 inch to 120 inch, with or without knockouts.

Main Features

• Lay-in Flat-Cover Type 1 Straight Sections are used for enclosing wire and cable in wireway runs
• Sections are completely open on one side so wires and cables can be laid in along wireway run
• No pulling through of wires or cables prevents damage to insulation that often occurs in a pull-through wiring system
• Flat cover design allows for mounting flush with walls or ceilings
• Keyhole screw slots on flat covers provide easy access
• Sections are available in lengths from 12 inch to 120 inch, with or without knockouts

Specifications

Type	Straight Section
Height	8 in / 203 mm
Width	8 in / 203 mm
Depth	12 in / 305 mm
Protection Rating	NEMA Type 1; IP30
Material	Mild Steel
Knockout Quantity, 0.50 - 0.75 in	4
Knockout Quantity, 1.00 - 1.25 in	4
Color	Gray
Color Code	ANSI 61
Finish	Powder Coated
Thickness	14 ga / 1.9 mm
BULLETIN NUMBER	F40FC

Documents and Downloads

Hoffman F88T112GVPWK Data Sheet	Click to View
Hoffman F88T112GVPWK CE-00056	Click to View
Hoffman F88T112GVPWK Declaration of Compliance	Click to View
Hoffman F88T112GVPWK EU Declaration of Conformity, Type 1 Industrial Wireway and Trough	Click to View
Hoffman F88T112GVPWK Lay-In Painted Flat-Cover Wireway NEMA Type 1 Spec Sheet	Click to View