Hoffman F88T148GVP | Straight Section Lay-in Flat-Cover Type 1, 8.00x8.00x48.00, Gray, Steel

Lay-in Flat-Cover Type 1 Straight Sections are used for enclosing wire and cable in wireway runs. Sections are completely open on one side so wires and cables can be laid in along wireway run. No pulling through of wires or cables prevents damage to insulation that often occurs in a pull-through wiring system. Flat cover design allows for mounting flush with walls or ceilings. Keyhole screw slots on flat covers provide easy access. Sections are available in lengths from 12 inch to 120 inch, with or without knockouts.

Main Features

• Lay-in Flat-Cover Type 1 Straight Sections are used for enclosing wire and cable in wireway runs
• Sections are completely open on one side so wires and cables can be laid in along wireway run
• No pulling through of wires or cables prevents damage to insulation that often occurs in a pull-through wiring system
• Flat cover design allows for mounting flush with walls or ceilings
• Keyhole screw slots on flat covers provide easy access
• Sections are available in lengths from 12 inch to 120 inch, with or without knockouts

Specifications

Type	Straight Section
Height	8 in / 203 mm
Width	8 in / 203 mm
Depth	48 in / 1219 mm
Protection Rating	NEMA Type 1; IP30
Material	Mild Steel
Color	Gray
Color Code	ANSI 61
Finish	Powder Coated
Thickness	14 ga / 1.9 mm
Weight	34 lb
BULLETIN NUMBER	F40FC

Documents and Downloads

Hoffman F88T148GVP Data Sheet	Click to View
Hoffman F88T148GVP CERT-00155	Click to View
Hoffman F88T148GVP CE-00056	Click to View
Hoffman F88T148GVP Declaration of Compliance	Click to View
Hoffman F88T148GVP Lay-In Painted Flat-Cover Wireway NEMA Type 1 Spec Sheet	Click to View