Hoffman F88T160GV | Lay-In Type 1 Galvanized Wireway Straight Section, 8.00x8.00x60.00, Steel

Lay-in Flat-Cover Type 1 Straight Sections are used for enclosing wire and cable in wireway runs. Sections are completely open on one side so wires and cables can be laid in along wireway run. No pulling through of wires or cables prevents damage to insulation that often occurs in a pull-through wiring system. Flat cover design allows for mounting flush with walls or ceilings. Keyhole screw slots on flat covers provide easy access. Galvanized material provides superior corrosion protection for outdoor applications. Sections are available in lengths from 12 inch to 120 inch, with or without knockouts.

Main Features

• Lay-in Flat-Cover Type 1 Straight Sections are used for enclosing wire and cable in wireway runs
• Sections are completely open on one side so wires and cables can be laid in along wireway run
• No pulling through of wires or cables prevents damage to insulation that often occurs in a pull-through wiring system
• Flat cover design allows for mounting flush with walls or ceilings
• Keyhole screw slots on flat covers provide easy access. Galvanized material provides superior corrosion protection for outdoor applications
• Sections are available in lengths from 12 inch to 120 inch, with or without knockouts.

Specifications

Type	Straight Section
Height	8 in / 203 mm
Width	8 in / 203 mm
Depth	60 in / 1524 mm
Protection Rating	NEMA Type 1; IP30
Material	Mild Steel
Color	Unpainted
Finish	Galvanized
Thickness	14 ga / 1.9 mm
Weight	45 lb
BULLETIN NUMBER	F40G

Documents and Downloads

Hoffman F88T160GV Data Sheet	Click to View
Hoffman F88T160GV Declaration of Compliance	Click to View
Hoffman F88T160GV CERT-00155	Click to View
Hoffman F88T160GV EU Declaration of Conformity, Type 1 Industrial Wireway and Trough	Click to View
Hoffman F88T160GV Lay-In Galvanized Wireway NEMA Type 1 Spec Sheet	Click to View