Honeywell Fire Systems ANNRLED Annunciator Module 10 Input Zones Red
Honeywell Fire Systems ANNRLED Annunciator Module 10 Input Zones Red

Honeywell Fire Systems ANNRLED Annunciator Module 10 Input Zones Red

Fire-Lite Alarms, Inc. Annunciator Module10 Input Zones Red
Part Number: FIL-ANNRLED
0 Review(s)
Write a Review
Retail Price:$272.73
Your Savings:$10.86(4%)
  • Low prices.

    Price match guarantee

  • In-House Experts.

    We know our products

  • Easy Returns.

    Quick & Hassle Free

  • Superior Selection.

    Extensive product catalog

The ANN-LED annunciator module provides LED annunciation of general system faults and input zones/points when used with a compatible Fire Alarm Control Panel (FACP). The ANNLED module provides alarm (red), trouble (yellow) and supervisory (yellow) indication for up to ten input zones or addressable points. ANN-RLED has red LEDs only for alarm communication of up to 30 addressable points. The ANN-LED is supplied standard with certain Canadian FACPs as required by ULC. The ANN-LED and the FACP communicate over a two-wire serial interface employing the ANN-BUS communication format. An additional two wires are used for 24-volt DC power. A single four-conductor unshielded cable may be used for both power and data communications. Up to eight ANN-BUS devices may be connected to the ANNBUS of each FACP.

  • ANN-LED connects to the ANN-BUS terminal on the FACP and requires minimal programming
  • Includes three LEDs for each zone: Alarm, Trouble and Supervisory
  • Compatible with the MS-9050UD, MS-5UD-3, MS-10UD-7, MRP-2001, MRP-2002, MS9200UDLS version 4.0 or greater, MS-9600LS and MS-9600UDLS
  • Can be remotely located up to 6,000 feet (1,829 m) from the panel
  • May be powered by 24 VDC from the host FACP or by remote power supply (requires 24 VDC)

  • Manufacturer Honeywell Fire Systems Us / Fire-Lite
  • Condition New
  • Maximum ANN-BUS Voltage: 24 VDC
  • Maximum Current: Alarm: 68 mA Standby: 28 mA
  • Maximum wiring distance from FACP: 6,000 ft. (1,829 m.)
  • Ambient Temperature: 32ºF to 120ºF (0ºC to 49ºC)
  • Relative Humidity: 93% ± 2% RH (noncondensing) at 32ºC ± 2ºC (90ºF ± 3ºF)
  • For use indoors in a dry location
  • Connections to FACP are power-limited and supervised
  • 5.160" (13.11 cm.) high x 10.043" ( 25.51 cm.) wide x 1.77" (4.5 cm.) deep
  • Related Items

    Recently Viewed Items