Honeywell Fire Systems H355 Addressable Heat Detector
Honeywell Fire Systems H355 Addressable Heat Detector

Honeywell Fire Systems H355 Addressable Heat Detector

Fire-Lite Alarms, Inc. Addressable Heat
Part Number: FIL-H355
0 Review(s)
Write a Review
Retail Price:$94.82
Your Savings:$23.37(25%)
  • Low prices.

    Price match guarantee

  • In-House Experts.

    We know our products

  • Easy Returns.

    Quick & Hassle Free

  • Superior Selection.

    Extensive product catalog

The Fire-Lite Alarm H355 Series thermal detectors are addressablesensors that use a state-of-the-art thermistorsensing circuit for fast response. These sensors are designedto provide open-area protection and are intendedfor use with Fire-Lite's MS-9600 and MS-9200UD FireAlarm Control Panels (FACPs). Both the H355 and H355R sensors provide fixed temperaturealarm detection at 135°F. The H355R sensor respondsto rate-of-rise conditions of greater than 15°F/8.3°C perminute. H355HT provides fixed high-temperature detectionat 190°F/88°C. These thermal detectors provide cost effective,addressable property protection in a variety of applications. Two LEDs on each sensor light to provide a local, visiblesensor indication. Remote LED annunciator capability isavailable as an optional accessory (P/N RA400Z).

  • SLC loop:
  • Two-wire SLC loop connection
  • Unit uses base for wiring
  • Addressing:
  • Addressable by device
  • Direct Decade 01 – 159 (MS-9600), or 01 – 99 (MS-9200UD) entry of address
  • Architecture:
  • Sleek, low-profile, stylish design
  • State-of-the-art thermistor technology for fast response
  • Integral communications and built-in device-type identification
  • Built-in tamper resistant feature
  • Built-in functional test switch activated by external magnet
  • Operation:
  • Factory preset at 135°F (57°C)
  • Rate-of-rise model (H355R), 15°F (8.3°C) per minute
  • 360°-field viewing angle of the visual alarm indicators (two bicolor LEDs). LEDs blink green in Normal condition and turn on steady red in Alarm
  • Visible LEDs “blink” every time the unit is addressed
  • Mechanicals:
  • Sealed against back pressure
  • SEMS screws for wiring of the separate base
  • Designed for direct-surface or electrical-box mounting

  • Related Items

    Recently Viewed Items