Keri Systems PXL-500W-NE Tiger II Controller For Wiegand Compatible Readers

The Keri Systems PXL-500 Tiger II Controller hardware platform provides sophisticated access control solutions for up to 256 doors at a single site and thousands of doors spread over a number of remote sites. The unique architecture and latest multiprocessor, RISC-based design techniques allow Keri to offer the system hardware at a lower cost compared to other manufacturers. It also contains many features that simplify and significantly reduce the cost of installation. The system is managed by Keri's Doors for use with Windows software.

Features

Double row header pins to ensure SB-593 is properly seated on PXL

Additional LED indicator to confirm SB is properly seated

RS-232 connector changed from DB-9 to quick disconnect terminal block

RS-485 continuity indicator LED

RS-485 connector different size so as not to interconnect with power input

LCD Display moved up so as not to hang below the PC Board

Specs

Manufacturer Keri Systems Inc

Condition New

Model PXL-500W-NE

Dimensions (PC Board) 5.6" H x 6.6" W x l.6" D (14.28 cm x 16.83 cm x 2.55 cm)

Reader Type Wiegand-compatible device

Power Requirements +12 VDC @ 125mA (PXL-500) add 375mA for SB-593

Inputs Door Sense, Request to Exit, Auxiliary/External Time Zone, Card Reader (2), A & B

Outputs Form C Lock Relay (3 Amp). Form C Alarm Relay (3 Amp). RS-232 Serial Port (DB-9M). Output for Optional LCD Display

Buffer Capacity 65,000 Cardholders, 3,600 Events

Temperature/Humidity 32°F to 140°F (0°C to 60°C) 0-90% Non Condensing

Communication Between Controllers: RS-485, 9600 Baud PC to Master: RS-232

Lithium Battery 5 Years Memory Retention

U.L. Listed UL/CSA Certification: The PXL-500 is UL certified under UL-508 (Control Equipment)