Brand: Lantronix | SKU: 500590

Lantronix C2210-1039 | Ion Platform Slide-in-cards10/100b-tx To 100b-fx, 1300nmmm (lc)

$353.47

Shipping calculated at checkout.

Low prices.

Price match guarantee
In-House Experts.

We know our products
Easy Returns.

Quick & Hassle Free
Superior Selection.

Extensive product catalog

Description

The ION C2210 is a media converter module that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber. The ION C2210 is a manageable device when installed in a managed ION chassis.

Key Features

Auto-Negotiation of speed and duplex on TP port
Auto-MDI/MDIX on TP port
Link Pass Through (LPT)
Far-End-Fault (FEF) detection
Pause (Software Controlled)
Automatic Link Restoration
Field Upgradeable Firmware
Can be used in any ION Platform Chassis
Standards based, will link with any Standard 10/100Base-TX and any Standard 100Base-FX ports

Manageable Features

Report converter status to chassis management software:
TP and Fiber Link Status
Hardware switch settings
Copper Port Speed
TP and Fiber Port Duplex
Fault condition
Write operation includes:
Power on/off device
Auto-Negotiation enable/disable
Force 10 Mbps or 100 Mbps
Force half or full-duplex
Select advertising modes when
Auto-Negotiation is enabled
LPT enable/disable
FEF enable/disable
Pause enable/disable
Auto-MDI/MDIX enable/disable

Specifications

Standards	IEEE 802.3u IEEE 802.3x
Data Rate	10 Mbps; 100 Mbps Layer 2
MAC Address Table	1K
Frame Buffer Memory	512 Kbits
Max Frame Size	2048 bytes
Switch	SW1: Auto-Negotiation (UP = enabled) SW2: Forced 100 Mbps/10 Mbps with Auto-Neg. off (UP = 100 Mbps) SW3: Forced Full/Half-Duplex with Auto-Neg. off (UP = Full) SW4: Full/Half-Duplex on fiber port (UP = Full) SW5: Auto-MDI/MDIX on UTP (UP = enabled) SW6: Link Pass Through (UP = enabled)
Internal Jumper	Auto-MDI/MDIX: Enable/Disable
Jumper	Hardware: Mode of operation is determined by the settings on the 4-position switch Software: Mode of operation is determined by the most recently saved on-board microprocessor settings
Status LEDs	FD (Fiber Duplex): ON= Full-duplex on fiber LACT (Fiber Link/Activity): ON = Fiber Link PWR (Power): ON=Connection to powered backplane (TP. Duplex/Link): Yellow = Half duplex, Green = Full-Duplex (TP. Speed): Yellow = 10Mbps, Green = 100 Mbps
Dimensions	Width: 0.86” [22 mm] Depth: 6.5” [165 mm] Height: 3.4”[86 mm]
Power Consumption	2.5 Watts, 200 mA @ 13.9 VDC
Environment	Environment specs are dependent on the chassis chosen Operating: 0°C to 50°C Humidity: 5% to 95% (non-condensing) Altitude: 0 – 10,000 ft.

Documents and Downloads

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Lantronix C2210-1039 | Ion Platform Slide-in-cards10/100b-tx To 100b-fx, 1300nmmm (lc)

Low prices.

In-House Experts.

Easy Returns.

Superior Selection.