Linear SNR00032 D-67 1-Channel Wireless Receiver

Add one channel of control to your security system or network of remote devices. Use for adding a zone, responding to a panic button, controlling remote arm/disarm, or many other uses. Relay output responds for four seconds to a transmitter's unique digital code. The output is isolated dry relay contacts. Dry contacts indicate that the switching contacts are isolated from the receiver’s power supply. The receiver provides normally open and normally closed contacts. The current rating of the relay output is 1 amp at 32 volts maximum.

Features

Dry contact relay output

Flexible power requirement: 11 to 24VDC or 12 to 16VAC

Specs

Manufacturer Linear Llc

Condition New

Encoding Technique Pulse width A-1 modulation at 250 bits/sec;four correct 8-bit words required to operate the output

Maximum Codes 256 digital format

RF Carrier Frequency 303.875 MHz

Power Requirement 11~24VDC, 12~16VAC

Current Consumption 10 mA standby, 40 mA operating

Relay Contact 1 amp @ 32V DC or AC, Both NO and NC

Operating Temperature 32° to 140° F (0° to 60°)

Antenna D-67 Wire lead (supplied)

Dimensions 4.9" W x 3.8" H x 1.3" D (125 x 97 x 33 mm)