Louroe Electronics DG-12II 12 Zone Alarming

The DG-12II from Louroe Electronics is a twelve zone alarming base stations designed to provide sound activated audio monitoring. As a system, it is interfaced with Louroe microphones or speaker/microphones mounted in remote locations. Each zone has a variable threshold level based on frequency and sound pressure, and a variable alarm delay (from 0.1 to 3.2 seconds) that can be set by the installer or owner. When a sound or disturbance exceeds the pre-set threshold level and time duration, the unit goes into alarm. A lighted LED and three second tone identify the zone, along with a relay contact for activating a camera or other annunciation. Requires companion DG-MA for two-way listen/talkback or DG-Monitor for one-way listen.

Features

19” Rack mountable

Variable threshold level control based on frequency and sound pressure

Interfaces with Louroe Alarming Base Stations AP-4CS, AP-8CS, or AP-12CS

Bi-color LED (each zone). GREEN when monitoring, RED when in alarm

Variable alarm delay control (from 0.1 to 3.2 seconds)

NO/NC relay contacts for each zone for activating camera or other annunciations

Two threshold level settings - HIGH (night) and LOW (day)

DAY and NIGHT threshold sensitivity switch

Automatic or manual reset for alarm cancellation: auto reset variable from 3 sec to 3 min.

Built-in tester for alarm audio and time delay

Zone expansion (for up to six microphones or speaker/microphones per zone using Model MLA-6 Mixer)

Specs

Manufacturer Louroe Electronics

Condition New

Model DG-12II

Power requirements for microphone 12Vdc @ 4mA

Input sensitivity @ alarm frequency -20 dB

Monitor output frequency 100 Hz - 10kHz

Relay contact 0.5A @ 125 Vac

Alarm tone duration 3 Seconds

Power consumption 42W (standby) 60W (max)

Size 19"W x 7”H x 10¼”D

Finish Black Anodized