Napco GEM-ACM1D Access Control Module for 1 Door with metal enclosure, power supply, transformer and software enhancement upgrade EPROM for Gemini Alarm Panel

Access Control Module for 1 Door Module with metal enclosure, power supply, transformer and software enhancement upgrade EPROM for Gemini Alarm Panel. Easily add-on access control to Gemini panels – affordable access and security in one.

Features

Seamless Integration with Gemini Control Panels GEMP3200, P9600, X255; easily programmed with Napco Quickloader (single site programming and shared database)

Supports HID & Gemini Prox Cards and Readers (both offered in money-saving kits

Optional PCD-Manager enduser software for corporate security or personnel departments, etc. Easy-to-use enduser Windows-based package for account management and self-maintenance provides limited enduser account control: Manage database of both alarm users and up to 1000 access control cardholders, logs, schedules, access groups, etc.(see sidebar).

Plug and play - GEM-ACCESS comes ready with its own enclosure, power supply (aux. for prox readers and mag locks) and battery backup. (GEM-ACMID)

Fast card processing transaction speeds

Easily expandable by-door with affordable GEM-2D Plug-in PCBs

Specs

Manufacturer Napco Security Systems Inc.

Condition New

Housing Dimensions: 11”x12 1/8”x3” (28x30.8x7.6cm) HxWxD

GEM-X255 Current Draw: 5mA

Operating Temperature: 0–49°C (32-120°F)

Input Power: 16.5VAC via CLASS 2 Plug-In 40VA or 50VA Transformer

Door Zone Loop Voltage: 10-13VDC

Door Zone Loop Current: 2.4mA with 2.2K EOLR

Door Zone Loop Resistance: 300 ohms maximum

Combined Door Lock Power: D1 PWR (terminals 3+ and 4-) + D2 PWR (terminals 5+ and 6-)

Voltage Rating: 12VDC

Maximum Current: 1.5A

Battery Standby Time: JP3 not installed: Standby Time = 0*; JP3 installed (factory default)

Reader 1 PWR: READER 1 PWR (terminals 17+ and 18-)

Voltage Rating: 12.5VDC to 11.7VDC with JP1 set to 12V (default). 5V with JP1 set to 5V.

Maximum Current: 125mA

Battery Standby Time: JP3 not installed and 4AH battery used = 4 Hour*; JP3 installed (factory default)

Reader 2 PWR**: READER 2 PWR (terminals 35+ and 36-)

Voltage Rating: 12.5VDC to 11.7VDC with JP4 set to 12V. 5V with JP4 set to 5V.

Maximum Current: 125mA

Battery Standby Time: JP3 not installed and 4AH battery used = 4 Hour*; JP3 installed (factory default)