Nitek FRS312104S00 10 Bit Stand Alone Single Channel Receiver

Nitek's FRS312104S00 is a single fiber per channel Universal-Mode™ video and data receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with single-mode or multi-mode fiber optic cabling types. The 3000 Series fiber optic transmission systems are designed to provide point-to-point, broadcast quality video transmission at an affordable cost, without compromise. The video is transmitted in a real time full bandwidth digital format. This insures the highest quality regardless of distance. By transmitting the video in an uncompressed format, there is no latency or loss of video quality. An Automatic Gain control feature built into the receiver makes this a ?plug-and-play” video system, requiring no field setup or adjustments. The unit is equipped with LED indicators which provide an at-a-glance operating and optics state. The 3000 Series 10 bit digital technology combined with ease of installation and inherent reliability have made this the system of choice for critical applications.

Features

Real time 10 Bit digital video eliminates signal degradation associated with distance

Automatic Gain control minimizes setup and adjustment time

Switchable P/T/Z data interface allows interfacing with a wide range of manufacturers protocols

Universal-ModeT allows the same unit to be used with multi-mode or single-mode fiber without any set up or field configuration

Wide dynamic range. Provides ?broadcast quality” video transmission

Directly supports all NTSC, PAL or SECAM video formats

Receiver is equipped with front panel LED status indicators to provide at-a-glance diagnostics of the system's video and optics state

Broad operating temperature range for use in protected outdoor applications

Specs

Manufacturer Nitek

Condition New

Optical Accepts both multi- and single-mode fiber

Multi-mode 50/125 or 62.5/125

Single-mode 9/125

Wavelength 1310nm

Optical Connector SC-PC

Path Loss 20dB min

Operating Temperature -40 to 165 Fahrenheit

Operating Humidity 0 to 95% non-condensing

Power Requirements +12VDC to +24VDC ac/dc

Height 4.330

Width 1.375

Depth 6.770

Alarm in Contact/relay in

Alarm out 100V / 150mA max