Nitek FRS344000S00 Four Channel Stand Alone Video Only Receiver

Nitek's FRS344000S00 is a four channel video only Universal-ModeT receiver. The system requires a single fiber per channel. Nitek's unique Universal-Mode™ optics allow the unit to be used with single-mode or multi-mode fiber optic cabling types. The 3000 Series fiber optic transmission systems are designed to provide point-to-point, broadcast quality video transmission at an affordable cost, without compromise. The video is transmitted in a real time full bandwidth digital format. This insures the highest quality regardless of distance. By transmitting the video in an uncompressed format, there is no latency or loss of video quality. An Automatic Gain control feature built into the receivers makes this a "plug-and-play" video system, requiring no field setup or adjustments. The receivers are equipped with LED indicators which provide an at-a-glance operating and optics state. The 3000 Series 10 bit digital technology combined with ease of installation and inherent reliability have made this the system of choice for many critical applications.

Features

Real time 10 Bit digital video eliminates signal degradation associated with distance.

Automatic Gain control minimizes setup and adjustment time

Universal-ModeT allows the same unit to be used with multi-mode or single-mode fiber without any set up or field configuration

Wide dynamic range. Provides broadcast quality video transmission

Receivers are equipped with front panel LED status indicators to provide at-a-glance diagnostics of the system's video and optics state

Directly supports all NTSC, PAL, or SECAM video formats

Broad operating temperature range for use in protected outdoor applications

Specs

Manufacturer Nitek

Condition New

System Design

Optical Accepts both multi- and single-mode fiber

Multi-mode 50/125 or 62.5/125

Single-mode 9/125

Wavelength 1310nm

Optical Connector SC-PC

Path Loss 20dB min.

General

Operating Temperature -40 to 165 Fahrenheit

Operating Humidity 0 to 95% non-condensing

Power Requirements +12VDC to +24VDC ac/dc

Mechanical

Height 4.330

Width 1.375

Depth 6.770

Video

Compression None, Uncompressed

Input / Output Level 1V p/p nominal

Input / Output Impedance 75 Ohm Unbalanced

Frequency Response 10Hz to 5.75Mhz

Differential Gain 1%

Differential Phase 1

Signal to Noise Ratio 67dB minimum

Fiber Connector SC-PC

Video Connection BNC

Video Standard NTSC/PAL