Nitek FTS541100R00 4 Channel Video By Directional Fiber Trans
Nitek FTS541100R00 4 Channel Video By Directional Fiber Trans

Need more information about this product?

Nitek FTS541100R00 4 Channel Video By Directional Fiber Trans

Part Number: NIT-FTS541100R00
0 Review(s)
Write a Review
Availability:
$3,051.31
Retail Price:$3,387.79
Your Savings:$336.48(10%)
  • Low prices.

    Price match guarantee

  • In-House Experts.

    We know our products

  • Easy Returns.

    Quick & Hassle Free

  • Superior Selection.

    Extensive product catalog

Nitek’s FRS541100R00 is a four channel Universal?Mode™ video receiver. Nitek’s unique Universal?Mode™ optics allow the same unit to be used with 1 single?mode or multi?mode fiber optic cabling types. The 5000 Series fiber optic transmission systems are designed to provide multi?channel, point?to?point, broadcast quality video transmission at an affordable cost, without compromise. The video is transmitted in a real time full bandwidth digital format. This insures the highest quality regardless of distance. By transmitting the video in an uncompressed format, there is no latency or loss of video quality. The 5000 Series uses Coarse Wavelength Division Multiplexing (CWDM) to transmit 2 wavelength channels for video transmission on a single optical fiber. Automatic gain control is built into the 5000 Series receivers making this a “plug?and?play” video system, requiring no field setup or adjustments. Receivers are equipped with LED indicators which provide an at?a?glance operating and optics state.

Features
  • Real time digital transmission eliminates signal degradation associated with distance
  • Universal?Mode™ allows the same unit to be used with multi?mode or single?mode fiber without any set up or field configuration
  • Wide dynamic range. No adjustments are required for installation, ‘plug and play’
  • Configurations available in single fiber and twin fiber configurations
  • Receivers equipped with front panel LED status indicators provide at?a?glance diagnostics of the systems video and optics state
  • Front panel LED status indicators provide at?a?glance status monitoring
  • Modular rack mount card provides flexible system design

    Specs
  • Manufacturer Nitek
  • Condition New
  • Compression None, uncompressed
  • Input / output level 1V P/P, nominal
  • Input / output impedance 75 Ohm unbalanced
  • Frequency response 10Hz to 5.57MHz min.
  • 7.5MHz cut off
  • Differential gain 2%
  • Differential phase 2º
  • Signal to noise ratio 67dB, 10 bit conversion
  • Video connection BNC
  • Optical connection LC
  • Video standard NTSC/PAL
  • Operating temperature 5º to 160º Fahrenheit
  • Operating humidity 0 to 95% non?condensing
  • Power requirements 12?24VAC or DC @ 300ma
  • Height 3U
  • Width 2 card slots
  • Depth 7.775
  • Related Items

    Recently Viewed Items