Optex AX-200TFRi | Wireless 200' Photoelectric Detector Complete w/ Inovonics transmitter and Batteries

The AX-200TFRi is a wireless 200' Photoelectric Detector from Optex that includes 4 x 3.6V batteries and an Inovonics transmitter which is capable of delivering high quality operation within a variety of detection applications. The AX-200TFRi wireless 200' detector comes with a low battery output w/ LED, an IP55 rating, a wide operating temperature, a DQ circuit, as well as a long battery life of five years, and a variable second interruption time. The AX-200TFRi detector also features a 200 distance range, a 530m arrival distance, plus a compact size that allows for indoor and outdoor mounting options on a wall, tower or pole mount. This exceptional 200?Photoelectric Detector comes as wireless ready with a multi functioning back box that offers compatibility with other manufacturer wireless operations, and is able to be effortlessly installed by all operators.

The iSeries AX-200TFRi is a 200ft. battery-powered photobeam detector that includes Inovonics EN1941 transmitters built in, making it a ready-to-install wireless solution for perimeter protection. Because no trenching or wiring is involved in the installation process, a substantial reduction in labor costs and install time can be expected. The AX-200TFRi also includes four lithium D cell batteries with a lifespan of three to five years. In addition, the AX-200TFRi is compatible with the AX-TW Series line of photobeam enclosures for a clean, concealed, wireless mounting option.Key FeaturesBatteries and Inovonics EN1941 wireless transmitter pre installed3-5 year battery lifeTriple tamper functionsIP55 Rating.

Optex - AX-200TFRi - Features

• 100ft. (AX-100TFR) and 200ft. (AX-100TFR) Models
• Significant cost saving alternative to traditional hardwired systems
• Long battery life (Aprox. five years for the 100TFR and three years for the 200TFR)
• Low battery output and LED (Separate wireless transmitter is required to monitor)
• Works with most manufacturers wireless system
• D.Q. circuit (environmental disqualification)
• IP 55 rated

Optex - AX-200TFRi - Specifications

Manufacturer	Optex Inc
Condition	New
Model	AX-200TFRi
Range	60m ( 200ft )
Maximum arrival distance	530m (1,740ft)
Detection method	Infrared beam interruption detection
Beam frequency selection	4 channel
Interruption period Variable between	50, 100, 250, 500 msec (4 steps)
Power Source	3.6 V 13.0 Ah: LSH20 lithium batteries manufactured by SAFT (not included) Transmitter: 2 units Receiver: 2 units
Current draw	810 µA T: 490 µA + R: 320 µA (at 25°C, 3.6 VDC)
Alarm output Form C-Solid State Switch	3.6 VDC, 0.01 A
Alarm period	2 sec (±1) nominal
D.Q. output Form A/B-Solid State Switch	3.6 VDC, 0.01 A
Low battery output Form A/B-Solid State Switch	3.6 VDC, 0.01 A (Transmitter & Receiver)
Operating temperature	-20°C – +60°C (-4°F – +140°F)
Environmental humidity	95% (Max.)
Alignment angle	±90° Horizontal, ±5° Vertical
Mounting	Indoor/Outdoor, Wall/Pole/Tower mounting
International protection	IP55