Pelco G35122KWV21A Image Pack
Pelco G35122KWV21A Image Pack

Pelco G35122KWV21A Image Pack

0 Review(s)
Part Number: PEL-G35122KWV21A
Retail Price:$774.07
Your Savings:$69.54(9%)
Pelco Image Pack
Write a Review
The Pelco ImagePak Color Camera Kit (1-3mm Lens, Mount) consists of an EH3512 enclosure, a C10CH-6 color camera, 13VA1-3 varifocal lens, and EM1450 Light-duty Wall Mount. The EH3512-2 is an indoor/outdoor 24 VAC enclosure with built-in heater, blower and defroster. The thermostatically controlled heater activates on at 50°F (10°C) and switches off at 80°F (27°C), while the defroster operates continuously. With die cast and extruded aluminum construction and gray polyester powder coat, the corrosion-resistant enclosure can withstand operating temperatures ranging from -10° to 120°F (-23° to 49°C). The removable camera sled inside the enclosure can be easily accessed via the front hinged lid and the link-lock latch at the rear can be padlocked for security. The camera sled has multiple holes and can be inverted for additional camera elevation. Two adjustable (PG13.5) glands on the bottom make installation of power and video cables easy. The enclosure is CE compliant, UL/cUL Listed and meets NEMA Type 4 and IP66 standards. Featuring a 1/3" CCD imager, the C10CH-6 Digital CCD Color Camera provides high-quality images at an ultra-high resolution of 540TVL. With a minimum illumination requirement of 0.3 lux, the camera is suited for low-level night time surveillance. It has a standard CS lens mount, and can be used with fixed, manual, or auto iris (DC or video drive) lenses. Area masking, titling, pixel correction, and preset lighting profiles can be selected through the on-screen menu, using the side joystick. Automatic gain control adjusts the signal strength to maintain a constant brightness level. Backlight compensation adjusts video gain to correct the exposure when the object being captured is in front of a bright light source. Auto white balance takes a standard white color reference to adjust the RGB (red, green, and blue) colors to produce good quality images in different light conditions. The analog eclipser function allows the lens to create clear images of subjects in a dark area with a strongly backlit background. The camera features electronic shutter control (ESC), flicker-less mode, and autosensing power (24 VAC with internal line lock or 12 VDC with internal synchronization) and offers long distance cable compensation. Connecting via the included 4-pin plug, the 13VA1-3 varifocal lens is a CS mount lens that features a direct-drive and has 4.3x optical zoom (manual). The adjustable lens has a focal length of 1.6-3.4mm. A relative aperture size between f/1.4 and close allows the lens to perform across a wide range of lighting conditions. The EM1450 is made from die-cast aluminum with gray polyester powder coat finish for indoor/outdoor use. The light-duty wall mount supports a maximum load of 20 lbs (9 kg) and can also be used for pole mounting with the PA101 adaptor. The enclosure is mechanically positioned on the adjustable head.

  • C10CH-6 Color Camera (1/3" CCD)
  • 13VA1-3 Varifocal Lens (1.6-3.4mm)
  • EM1450 Light-duty Wall Mount
  • Adjustable Lens with 2.1x Optical Zoom
  • Indoor/Outdoor Enclosure with Heater
  • Removable Camera Sled for Easy Access
  • High Resolution 1/3" CCD Imager
  • Automatic Gain Control / White Balance
  • Analog Eclipser Function

  • Manufacturer Pelco
  • Condition New
  • Image Sensor 1/3" interline transfer CCD
  • Resolution 540TVL
  • Pixels 768 (H) x 494 (V)
  • Lens 1.6-3.4 mm auto iris IR varifocal lens (13VA1-3)
  • Iris Operation DC/video drive (autosensing)
  • Minimum Illumination 0.4 Lux
  • Synchronizing System AC line lock/internal
  • Signal to Noise Ratio >48dB
  • Operating Temperature 14 to 122° F (-10 to 50°C)
  • Recently Viewed Items

    Customer Service available Mon - Fri 7am - 7pm EST

    Contact us: [email protected]