Protection Technologies SDI-77XL-MW Medium Angle 100 ft. x 60 ft. - 12VDC Power, Microwave Only

The High Security Versions of the PIRAMID XL offer enhanced detection capability when compared to the standard PIRAMID XL and XL2 Versions. The detection parameters are altered to enable these sensors to offer greater overall detection capability for slow moving, fast moving and crawling intruders. The PIRAMID XL high security version sensors are manufactured using PROTECH’s proprietary Stereo Doppler Microwave Technology. The high security versions of the PIRAMID XL sensors are offered as dual technology sensors, as well as single technology microwave-only sensors. The following are the models offered in each category.

Features

The Dual Technology models are also equipped with a dual element Passive Infrared Sensor. In these versions the independent sensor modules are "And Gated" and must activate simultaneously to create an overall sensor alarm

The various models of high security PIRAMID XL offer different levels of detection capability and stability

Stereo Doppler Microwave Detector - Two receiving channels with the ability to eliminate vibration and periodically moving objects as sources of false alarms

Dual Element Infrared Detector - Ignores normal temperature variations, yet is very responsive to rapid infrared changes created by an intruder. (Dual Technology Sensors Only)

Microprocessor Controlled - Proprietary integrated circuit design provides enhanced digital signal processing for both microwave and passive infrared technologies

Balanced Temperature Compensation - Stereo Doppler Microwave and Passive Infrared portions automatically adjust detection parameters to compensate for the loss of range that occurs at elevated temperatures. (Dual Technology Sensors Only)

Stereo Doppler Supervision - A component failure will cause the sensor to lock-in alarm.

Digital Range Control - Ten-position digital switch adjusts how far the sensor detects (to its maximum range)

Digital Sensitivity Control - Ten-position digital switch adjusts the amount of movement required to initiate an alarm condition

Master Alarm LED - Displayed on the face of the unit indicating the alarm relay status

Analytic LED's - Alarm and Environmental Caution LED's for both technologies are displayed on the face of the sensor. An internal switch can disable both Master and Analytic LED's

Walk-Test Sounder - Optional audible tester to assist in walk-test and initial sensor set-up. The XL-Sounder greatly simplifies the installation as it enables walk-testing and adjustment by a single installer

Swivel Mounting - 180° Horizontal Adjustment, 90° Vertical Adjustment

Tamper Proof - Tamper switch with terminal connection

All Solid State Relay - User selectable form C relay output. A Solid State relay is flexible, silent and more reliable than an electromechanical relay

Metal Housing - Rugged, weather-proof housing offers maximum protection against RFI and EMI interference.

Weather Shroud - Metal hood that routes rain away from sensor's face and provides maximum protection from ice, snow, wind and sun loading

Specs

Manufacturer Protection Technologies Inc.

Category New

Input Voltage: 8.5 to 20 VDC

Current Consumption: 150 mA@12 VDC (LED’s off)

RF Power Density: 120 uW/cm2 max. at the face of the unit

Operating Temperature: -30 F to 130 F (-34 C to 54 C)

Operating Humidity: 0 to 100% Relative Humidity

Relay Contact Rating: 0.1A, 50V

Housing Dimensions: 6 1/4" L x 5 1/4" W x 3 1/2" H (16.5cm L x 13.3cm W x 8.5cm H)

Shroud Dimensions: 9 1/4" L x 6" W x 41/4" H (23.5cm L x 15.25cm W x 11cm H)