Seco Larm E964Q495Q Quad-Phtob Det f/ indr/odr range 495'

SECO LARM E-964-Q495Q Quad-Photobeam Detector for indoor or outdoor use. range is 495' (150m) outdoor and 990' (300m) indoor.. Multi-frequency, Laser alignment, Built-in heater, IP66 weatherproof, Environmental output, 12-24 VAC/DC. ENFORCER Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security both indoors and outdoors.

Features

Built-in laser beam alignment system speeds accurate, reliable positioning.

Multi-frequency (4 channels selectable).

Quad infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves, birds, etc.

Lensed optics reinforce beam strength & provide excellent immunity to false alarms due to rain, snow, mist, etc.

Weatherproof, sunlight-filtering case for indoor & outdoor use.

Anti-frost system with built-in heater so that beam functions even in extreme conditions.

Automatic input power filtering with special noise rejection circuitry.

N.C./N.O. alarm output.

N.C. tamper circuit included.

Non-polarized power inputs.

Quick, easy installation with built-in laser beam and audible alignment system.

Built-in alignment strength indicator.

Interruption time adjustable for nearly all situations.

Specs

Manufacturer Seco-Larm Usa Inc.

Condition New

Model: E-964-Q495Q

Max. range (outdoor): 165' (50m)

Max. range (indoor): 330' (100m)

Current: 100mA

Power: AC/DC 12~24V (Non-polarity)

Detection system: Simultaneous break of 4 beams

Interrupt speed*: 50msec~700msec (adjustable)

Alarm output: NO./NC. relay, 1A 120VAC

Tamper output: NC. switch, 1A 120VAC

Alarm LED (Receiver): Red LED ON: When transmitter and receiver are not aligned or when beam is broken

Signal LED (Receiver): Yellow LED - OFF: Beam aligned properly

- FLASH: When receiver's signal weak

-ON: Beam broken or beam alignment not proper

Power LED (Rx & Tx): Green LED ON: Indicates connected to power.

Laser wavelength: 650nm.

Laser output power: 5mW.

Alignment angle: Horizontal (+/-)90, Vertical: (+/-)15

Operating temperature -13F (-25C) to +131F (+55C)