Seco Larm EVT-PH16-4T2Q 16 Port Passive UTP HUB, Video/Data And Surge Protection Rack Mount Or Stackable

The EVT-PH16-4T2Q allows up to 16 color or monochrome CCTV cameras to be connected via inexpensive Cat5e/6 unshielded twisted pair (UTP) cable to a video switcher or multiplexer. It cuts the cost and complexity of security networks and CCTV access control by eliminating the need to run expensive coax cable to multiple CCTV cameras. A built-in RS485 port allows the transmission of PTZ (pan/tilt/zoom) signals to up to 16 CCTV cameras or other devices.

Features

Connects up to 16 CCTV cameras to a central location using low-cost Cat5e/6 cable

Complete passive operation, no power required

Works in conjunction with passive or active video baluns

Works with full-motion CCTV cameras up to 2,000 feet (610 meters)1 away via passive video baluns

Feeds the camera signals to nearly any standard video multiplexer, switcher or digital video recorder via coaxial cables

Built-in RS485 port connects to a PC or other device to control the pan, tilt, and zoom (PTZ) of up to 16 remote cameras or devices

High immunity from interference - Built-in impedance coupled device and noise filter

Compact enclosure, only 1U (1.75" / 44.5mm) high

Mounts in a standard 19" (483 mm) rack

Built-in transient protection and interference technology for existing UTP cables

Gold-plated BNC connectors for added reliability and longer life

Completely passive operation, no power required

Specs

Manufacturer Seco-Larm Usa Inc.

Condition New

Video input ports 16 x 2-wire ports on removable terminal blocks

Video input cables Unshielded twisted pair (UTP), Category 2 or better (best if Cat5e/6)

Video output ports 16 x BNC connectors, each 1.0Vp-p, 75©

Video output cables Coaxial

Data input RS485 port for PTZ control from PC or other device

Power No power required

Surge protection Video and data

Size 1U form factor, 171/4"x63/4"x13/4" (482x170x44 mm)

Material Steel cabinet, black matte finish