Seco Larm SK-1123-FQ Flush-Mount Outdoor Access Control Keypad

The SECO-LARM SK-1123-FQ is a stand-alone flush-mount outdoor access control keypad that is ideal for office, commercial, and home security installations. This self-contained security keypad has a built-in 5-Amp relay output and a 100mA transistor ground output for maximum flexibility when connecting to electronic door strikes, door alarms, door chimes, alarm control panels, or other security and access control components. The outputs on the SK-1123-FQ can be programmed for timed (1~999 seconds) or ON/OFF operation, and this unit includes a mantrap feature that will only allow a protected area with (2) doors to open one door at any given time. The SK-1123-FQ can be programmed for up to 100 4-digit to 8-digit user codes for the primary output, and up to 10 4-digit to 8-digit user codes for the secondary output. All programming and code information is stored in non-volatile EEPROM memory to protect the data in case of power loss. This flush-mount stand-alone controller featured programmable LED keys, code flexibility, and an egress input for exiting the protected premises. The SK-1123-FQ offers all the reliable and critical security features needed for a successful access control system installation. Install this stand-alone keypad to increase the security measures at any entry locations.

Features

Each relay can be programmed for momentary (1-999 seconds) or latch

Door-forced-open and door-propped-open alarm output

Door-hold-open mode available

Specs

Manufacturer Seco-Larm Usa Inc.

Category New

Duress output: Signals a silent alarm if an authorized user is forced to open the door under duress

Code flexibility: Each code can be 4~8 digits long

Dual voltage: 12~24 VDC/VAC operation

Programmable LED keys: Full-time ON, ON when keys are pressed, Full-time OFF; suitable for solar applications

Mantrap: For a protected area with 2 doors, this feature allows only 1 door to be open at any time