Seco Larm SS040QW Vibration Detector For Closed Circuits

Seco-Larm SEL-SS040QW Vibration detector for closed circuits to protect walls, windows, ceilings. Pure-silver contact points, adjustable sensitivity, and tamper-proof cover. Contact rated 1.0A@50VDC. White. Connect windows, walls, ceilings, cabinets or safes to your hardwired alarm system. The Vibration Detector can be used with any security system with normally closed circuits, triggering an alarm when the device or point of entry it's monitoring is shaken. Security wiring is sold separately to connect the tamper switch to your alarm system. A silver-plated contact ensures reliability and long-term operation. A built-in tamper switch is independent in circuit from the vibration detector, so the switch can trigger the alarm panel if the cover is removed. Vibration contacts are adjustable for different surfaces. Install with two-sided adhesive tape (not included).

Features

Protect windows, cabinets or safes from unwanted entry

Used in alarm systems with normally closed circuits

Silver-plated contact ensures reliability and long-term operation

Specs

Manufacturer Seco-Larm Usa Inc.

Condition New

Circuit: Normally closed contact, momentary open when activated

Materials: Contact: pure silver; case: ABS resin

Contact Pressure: Adjustable from 1g to 50g, recommended setting between 5g and 25g

Break Time: Approx. 45ms max. (@ 6g pressure)

Contact Rating: 1.0A @ 50V DC

Life: Over 100,000 contacts

Dimensions: 5/8" x 7/8" x 2 3/8" (16mm x 22mm x 60mm)